XIAOMI MI 11

[KeYoKe]

Phone camera hump protector is not necessary. It will reduce light to the camera sensor, maybe add flares, distortion, colour tinting to image.

Sorry i ocd, so i try minimise the scratches on my phone as much as possible. The camera bump so big, high chance of scratching

 

[Hailgod]

HTC phones used to have real sapphire glass covering the camera lens and was almost impossible to scratch.
nowadays everything is normal glass or fake sapphire glass (iphones)

 

[Illusionist_85]

MY sold out? That's fast LOL

probably flipped to overseas like sinkland

 

[Zinna]

MY sold out? That's fast LOL

How many sets they selling? I see the facebook comments got people say only got 200 sets for sale
Hope when come sinkie, sinkies won't be interested to i can get my set

 

[Computeron]

Just now i saw one carousell seller selling 12+256 @ $1489.
I pm ask ready stock? He said just sold.
He alao said he was shocked many ppl asking about it.

 

[Computeron]

How many sets they selling? I see the facebook comments got people say only got 200 sets for sale
Hope when come sinkie, sinkies won't be interested to i can get my set

This might be a problem xiaomi may send more sets to malaysia and delay sg launch.

 

[tckrto]

Just wait for the hype to get over than stock will resume back.

 

[Stanley W]

Wonder if stock is affected by silicon crunch ; whilst end up like gpu...

 

[Stanley W]

Phone camera hump protector is not necessary. It will reduce light to the camera sensor, maybe add flares, distortion, colour tinting to image.

Yeah I encountered flare before. And depending on the quality of the protector, it might lower the light transmission. U might not see it as the camera will auto tune iso or some other parameters.

 

[KeYoKe]

Just wait for the hype to get over than stock will resume back.

Maybe by then even more promotion

 

[tckrto]

Promotion maybe not. Singapore and Malaysia is kinda of different, Malaysia sold out could be due to flippers. Singapore depends on the phone. Last time during 2014 days where everyone have to snatch it online via xiaomi platform. The hype was real and within a min can sold out. Nowadays even with physical store any new launch just look at the queue can tell how much the phone is worth pursuing. Plus there's so many value for money phone out there many may not want this Mi 11 Ultra immediately.
Just my observation and opinion.

 

[KeYoKe]

Yeah I encountered flare before. And depending on the quality of the protector, it might lower the light transmission. U might not see it as the camera will auto tune iso or some other parameters.

I cannot deny it does affect picture quality slightly. But i rather sacrifice a bit than the camera lens scratch

 

[tckrto]

I cannot deny it does affect picture quality slightly. But i rather sacrifice a bit than the camera lens scratch

SG$ 1.26 8%OFF | New Rear Back Camera Glass Lens For Xiaomi Mi 10T Pro 11 10 Ultra Lite / For Redmi Note 10 Pro 9T 5G Repair Parts https://a.aliexpress.com/_m0rGB5H

So cheap for Mi 10 Ultra. I am sure later Mi 11 Ultra will have also.

 

[KeYoKe]

SG$ 1.26 8%OFF | New Rear Back Camera Glass Lens For Xiaomi Mi 10T Pro 11 10 Ultra Lite / For Redmi Note 10 Pro 9T 5G Repair Parts https://a.aliexpress.com/_m0rGB5H

So cheap for Mi 10 Ultra. I am sure later Mi 11 Ultra will have also.

Question is how to replace

 

[tckrto]

Question is how to replace

I replaced my mi 9 and mi 10 using hair dryer blow at the crack glass then remove and replace with new one. I guess the same apply for Mi 11 Ultra lol.

 

[Ctrl_Alt_Del]

Question is how to replace

Theoretical heat the camera area to melt the adhesive, then use super thin pry tool to cut the adhesive. However most of the video just use flat head screwdriver to scrape the glass since already cracked. Better one remove the back panel first, so that the glass shards and cleaning alcohol will not drop into the camera.

 

[KeYoKe]

I replaced my mi 9 and mi 10 using hair dryer blow at the crack glass then remove and replace with new one. I guess the same apply for Mi 11 Ultra lol.

Theoretical heat the camera area to melt the adhesive, then use super thin pry tool to cut the adhesive. However most of the video just use flat head screwdriver to scrape the glass since already cracked. Better one remove the back panel first, so that the glass shards and cleaning alcohol will not drop into the camera.

Think a normal person cant replace ba.... Too tedious.. will stick to my lens protector instead...

 

[ryan_khoo]

I bought my Note 10+ from Malaysia. No issue. Everything works fine. SW update is faster too.. I believed it will work as good as a local set bah

Thanks bro micshang for your confirmation

 

[thewiseone]

 

[ryan_khoo]

Looks like a heavy hp