Air purifier? - Part 2

WussRedXLi

Greater Supremacy Member
Joined
Jun 15, 2001
Messages
95,027
Reaction score
11,485
Dubai Municipality Air Quality Network


Dubai is known throughout the world as a bold and forward-thinking city. When Dubai Municipality needed to upgrade their air quality network they chose to explore alternatives to traditional US EPA-type analyzers. Today a fourteen station network comprised of AQM 60 stations provides real-time continuous measurement of common air pollutants such as ozone, nitrogen dioxide, carbon monoxide, sulphur dioxide, and particulate matter.


The Customer

Dubai Municipality is the organisation charged with managing the city’s growth and improving the quality of life enjoyed by the more than two million people who live there. Ensuring the quality of the air they breathe is an on-going challenge. The number of cars on the roads has soared, placing Dubai amongst cities with the highest rates of car ownership in the world. Furthermore Dubai’s population is expected to increase by as much as 300% over the next decade.

The Problem

To report on and manage air quality, Dubai Municipality Environment Department (DM-ED) had invested in a network of six Ambient Air Quality Monitoring Stations (AAQMS). At the time they were installed, in 1994, care was taken to select the most suitable sites and locations from which to measure and report the quality of the air in the city.

But Dubai is growing and changing so fast that, after just a few years, the network of six monitoring stations were left stranded in locations no longer as indicative as they once were. Weighing over one tonne and being the size of a removal van, the stations could not be easily moved in response to the city’s evolution.

As a result Dubai Municipality initiated a procurement process to select a suitable equipment supplier for expansion of the air quality monitoring network. The supplier would need to meet the DM ED’s requirements for price and performance as well as demonstrating the ability to deal with the extreme temperatures and frequent dust storms common in the region.

The Solution

Aeroqual, with its local partner, Enviro’ & Industrial Solutions ME, won the tender in competition with a number of global instrumentation suppliers. Dubai Municipality was drawn to the proposal based on the AQM60 air quality monitoring station for a number of reasons.

At a third of the price of traditional monitoring stations, for the same budget they were able to buy fourteen (14) AQM60s AAQMS rather than just five if they went with the traditional reference monitoring stations. This would allow Dubai Municipality to increase their density of measurement which would give them a better understanding of air quality in their rapidly developing city.

In addition, the AQM60’s compact size and lightweight format (weighing ~95% less than a reference monitoring station) allowed the stations to be located in places where traditional monitoring stations could not go. And, as the city grows and develops further, the network can be quickly and easily expanded to include locations of interest.

Total cost of ownership was another key consideration. The power draw of an AQM60 station is 10% of a traditional reference monitoring station, and the cost of spares and maintenance was calculated to be 20% of the equivalent running costs of a reference monitoring station. An optional integrated automatic calibration system reduces the number of technician visits, an attractive feature when temperatures can reach over 40°C in the hottest months.

Performance and conformity to international standards was another factor in Dubai Municipality’s decision. Because the AQM60 does not use the same measurement principles as analyser technology used in traditional reference monitoring stations, it does not carry the same US EPA equivalence approvals. However, by operating a mixed-asset solution based on fourteen AQM60s and one mobile EPA reference station, Dubai Municipality was able to have the best of both worlds – another example of Dubai’s tendency for forward-thinking.

Evaluation

The AQM60-based network extension of 14 stations has been operational since early 2012, and the equipment has been providing Dubai Municipality with more comprehensive air quality data than ever before. As a leader in the region Dubai Municipality hopes other cities will follow their example.

aqm-60-2.jpg


 

johnmoocs

Junior Member
Joined
Dec 10, 2015
Messages
37
Reaction score
0
so this is 1000$ samsung

Without any test kit we can feel the difference with the AP on and off.
But $1k is really not easy to be justified for the function of purifying + humidifier + ionizer.

I think the basic model of Samsung should do the job well and planning to get some for our new home in future. :):):)
 

Mem2003

Member
Joined
Sep 30, 2003
Messages
440
Reaction score
1
Any difference between old Samsung model AX037FCVAUWD (37m2 41.6m2 under another) vs AX40H5000UWD and vs SG model AX041FCVAUW/TS

Cosmetic white with blue trim.
Dim 362Wx213DxH470mm
34W 6.9KG

Thanks
---------
For AX40H5000UWD , if don't put the pre-filter and HEPA+de filters, can we test by just power the machine/Fan unit without spoil it?

=======
Just get another machine that has humidifier function like BIOCair. (Tape water or ?? Water)
If worst, buy and put BIOCair air purifying solution
 
Last edited:

WussRedXLi

Greater Supremacy Member
Joined
Jun 15, 2001
Messages
95,027
Reaction score
11,485
---------
For AX40H5000UWD , if don't put the pre-filter and HEPA+de filters, can we test by just power the machine/Fan unit without spoil it?

=======
Just get another machine that has humidifier function like BIOCair. (Tape water or ?? Water)
If worst, buy and put BIOCair air purifying solution

If it's piezoelectric humidifier, it's best that you put filtered tap water. Just microfiltration or ultrafiltration shd be ok. Tap water has some TDS/Total Dissolved Solids and has been found to cause infections in severe cases and the rise in PM2.5 is measurable and HAS been measured by 1 EDMWer in this thread with a laser particle counter, as googled and posted before in this thread.

SG PUB water is clean enough (think TDS is below 100), and with this knowledge, the risk is up to the individual to take esp with infants or chronically/seriously ill and immunosuppressed.


You can measure the power of the AX40 without HEPA filter, I think it's in the 50W+ range. With filter, I got 27W-ish. With Taobao 25mm 百姓 HEPA, I measured 18W. ie with more resistance meaning lower rpms, the power consumption goes down.
 

sehsuan

Senior Member
Joined
Sep 12, 2001
Messages
1,907
Reaction score
0
If it's piezoelectric humidifier, it's best that you put filtered tap water. Just microfiltration or ultrafiltration shd be ok. Tap water has some TDS/Total Dissolved Solids and has been found to cause infections in severe cases and the rise in PM2.5 is measurable and HAS been measured by 1 EDMWer in this thread with a laser particle counter, as googled and posted before in this thread.

SG PUB water is clean enough (think TDS is below 100), and with this knowledge, the risk is up to the individual to take esp with infants or chronically/seriously ill and immunosuppressed.


You can measure the power of the AX40 without HEPA filter, I think it's in the 50W+ range. With filter, I got 27W-ish. With Taobao 25mm 百姓 HEPA, I measured 18W. ie with more resistance meaning lower rpms, the power consumption goes down.

You just read my mind - I just purchased a Xiaomi TDS meter :-D
 

patcheon

Arch-Supremacy Member
Joined
Jun 21, 2004
Messages
12,339
Reaction score
5
Test run my new Philips AC 4012 AP in an approx. 21sqm room. AP was running on low setting with windows closed and AC running.
12376054_10154427814574278_8360327577636361788_n.jpg


Readings on my particle meter at the start of the run.
12375983_10154427814624278_3159797236533806020_n.jpg


Readings after approx 1 hour.
10274208_10154427814679278_2602301914965619592_n.jpg
 

WussRedXLi

Greater Supremacy Member
Joined
Jun 15, 2001
Messages
95,027
Reaction score
11,485
Test run my new Philips AC 4012 AP in an approx. 21sqm room. AP was running on low setting with windows closed and AC running.


Readings after approx 1 hour.

32 -> 8 ug/m3 in 1hr? You checked your sealing at the windows' gaps?

This is how 3M Filtrete can do in my room with a 9000 BTU/hr FCU and 38 x 60cm piece of 3M in 20 mins (whole surface area not fully utilised though). Albeit a pretty small bedroom of about 12 sqm.

With 2015 haze loading, taking for eg the days with heaviest loading like for eg the Hari Raya one, I think you won't even get below PSI 100 (55 ug/m3 NEA). Coz some of us with very good airflow found it difficult to get below 50 ug/m3 on the meter (approx. 25 ug/m3 NEA)

Of course, the good news is that 2015 severity will never happen again for a good few years. :D

159833437.pAIzADrV.3.jpg
 

patcheon

Arch-Supremacy Member
Joined
Jun 21, 2004
Messages
12,339
Reaction score
5
32 -> 8 ug/m3 in 1hr? You checked your sealing at the windows' gaps?

This is how 3M Filtrete can do in my room with a 9000 BTU/hr FCU and 38 x 60cm piece of 3M in 20 mins (whole surface area not fully utilised though). Albeit a pretty small bedroom of about 12 sqm.

With 2015 haze loading, taking for eg the days with heaviest loading like for eg the Hari Raya one, I think you won't even get below PSI 100 (55 ug/m3 NEA). Coz some of us with very good airflow found it difficult to get below 50 ug/m3 on the meter (approx. 25 ug/m3 NEA)

Of course, the good news is that 2015 severity will never happen again for a good few years. :D

159833437.pAIzADrV.3.jpg

Yup...I think there are gaps in my windows' seals. Leaky old house. :( The pm2.5 readings are fluctuating between something like 4 - 9 ug/m3 in the past 1.5 hours. Mostly ard 5 to 6 ug/m3 level.
Btw, they are sliding windows. Are those type of windows basically less air tight?
 
Last edited:

johnmoocs

Junior Member
Joined
Dec 10, 2015
Messages
37
Reaction score
0
Test run my new Philips AC 4012 AP in an approx. 21sqm room. AP was running on low setting with windows closed and AC running.
12376054_10154427814574278_8360327577636361788_n.jpg


Readings on my particle meter at the start of the run.
12375983_10154427814624278_3159797236533806020_n.jpg


Readings after approx 1 hour.
10274208_10154427814679278_2602301914965619592_n.jpg

Your measuring kit looks nice!
May I know what is this model and how to get it? :s22:
 

WussRedXLi

Greater Supremacy Member
Joined
Jun 15, 2001
Messages
95,027
Reaction score
11,485
Yup...I think there are gaps in my windows' seals. Leaky old house. :( The pm2.5 readings are fluctuating between something like 4 - 9 ug/m3 in the past 1.5 hours. Mostly ard 5 to 6 ug/m3 level.
Btw, they are sliding windows. Are those type of windows basically less air tight?

Those sliding windows are somewhat leaky at the top and vottom-side if there is wind blowing. Naturally if a strong wind is blowing then there is a problem. During a thunderstorm, if the windows howl, then yes they are leaky.

The good "side-effect" is that there is little chance for VOCs and CO2 levels to rise to high levels. :D
 

Lucky177

Master Member
Joined
Jul 1, 2002
Messages
4,246
Reaction score
80
How was it?

Which 2in1 (Air purifying with humidifying) is recommended?

For those interested in 2in1 type, I just happened to see this one at Qoo10. Sharp/Japan. No idea good or not, personally still prefer standalone AP.

7d4jdWn.jpg
 

johnmoocs

Junior Member
Joined
Dec 10, 2015
Messages
37
Reaction score
0
How was it?

Which 2in1 (Air purifying with humidifying) is recommended?

Based on China Consumer Report, I think Samsung AP is generally better than others.

But you can skip Samsung PAPER series as I don't think it's value for money.
Majority here are using Jupiter series (without humidifier) which I think I will get some in futures. :s13:
 
Last edited:

kendrick272

High Supremacy Member
Joined
Jan 30, 2008
Messages
40,653
Reaction score
1,212
For those interested in 2in1 type, I just happened to see this one at Qoo10. Sharp/Japan. No idea good or not, personally still prefer standalone AP.

7d4jdWn.jpg

I cannot afford to get 2 separate devices as my room is not big enough.

Any one bought this sharp KC-A40K-W?

Based on China Consumer Report, I think Samsung AP is generally better than others.

But you can skip Samsung PAPER series as I don't think it's value for money.
Majority here are using Jupiter series (without humidifier) which I think I will get some in futures. :s13:

Your unit so far so good? How much is the total damage including spare filters?
 

patcheon

Arch-Supremacy Member
Joined
Jun 21, 2004
Messages
12,339
Reaction score
5
Those sliding windows are somewhat leaky at the top and vottom-side if there is wind blowing. Naturally if a strong wind is blowing then there is a problem. During a thunderstorm, if the windows howl, then yes they are leaky.

The good "side-effect" is that there is little chance for VOCs and CO2 levels to rise to high levels. :D

Yup yup...my room windows are facing north and is now in the direct impact of the prevailing winds. :s22::s22::D
 
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top