Huawei Mate 20

[AyuReady]

Actually gotten it to work and scan in 30 sec or so. Trick is to place the toy lying on its side first.

Will try to retrieve my file and show later

Anyone managed to try out the 3d scanning successfully? I tried many times but failed miserably. And the phone gets hot when using this app!

Sent from HUAWEI LYA-L29 using GAGT

 

[AyuReady]

Another quickie scan. Wonder if during daylight will be better.

Quite good for a novelty. The soft toy should be relatively rigid with no moving parts like tail or ribbon if not quite hard for the mesh to close.

Will try on a rigid item to test for fun next.

Think depends on the object and my first attempt was OK. Took less than 1 min

Yes it does not work well. out of 10 attempts, only 1 was OK. but not satisfied

 

[Hello_Kitty]

Why suddenly so many people change from Samsung to huawei? ??

 

[summersky1986]

Why suddenly so many people change from Samsung to huawei? ??

Were u from sgforums

Sent from 10char using GAGT

 

[kirium76]

Yep I guess with every case there is risk. But it was the staff there that told me confirm can use with default case. Asked 2 of them. So to each his own I guess.

The RWM said this current batch of glass is smaller than the previous version and thus would be able to accommodate the free case.
I would say the workmanship is quite good. And gave ample time to cure.

Sent from HUAWEI LYA-L29 using GAGT

 

[kirium76]

Think depends on the object and my first attempt was OK. Took less than 1 min

Your dog is 15 to 30cm big?

Sent from HUAWEI LYA-L29 using GAGT

 

[athenodorus]

Think depends on the object and my first attempt was OK. Took less than 1 min

When I actually see a normal looking scanned object den I'm convinced it's not a gimmick.

It's so pain in da ass to even scan and most of the successful ones doesn't even looked good (disoriented).

 

[siaoz85]

Guys, I thought most ppl here who went with Red White Mobile loca glue tempered glass have no issues with fingerprint sensor. But for me, it was wrong most of the time. Even after I re register my fingerprints, it was abit hard to register. Any idea what's wrong? But the feel of tempered glass and its sensitive is perfect. Only fingerprint can't use at all

I think I know what is the issue already. Nothing wrong with the screen protector. When I'm in an air con area and my fingers are very cold, I think there is no sweat / my finger becomes very dry and I always cant get the fingerprint reader to work. When I'm not in a very cold environment, my fingerprint works all the time.

I read online that we can counter this by also registering our fingerprints during cold conditions as additional fingerprints so it works in both normal and cold conditions. Some people have the same issue for older iPhones as well. Can give it a try.

 

[AyuReady]

Quite easy if u make the subject lying sideway as per their video first

The result is quite similar to dedicated handheld scanner (which are usually also quite unusable when scanning soft toys. Will scan a rigid object to try when I am free hehe

When I actually see a normal looking scanned object den I'm convinced it's not a gimmick.

It's so pain in da ass to even scan and most of the successful ones doesn't even looked good (disoriented).

 

[AyuReady]

Yes think 18-20cm bah

Your dog is 15 to 30cm big?

Sent from HUAWEI LYA-L29 using GAGT

 

[athenodorus]

Quite easy if u make the subject lying sideway as per their video first

The result is quite similar to dedicated handheld scanner (which are usually also quite unusable when scanning soft toys. Will scan a rigid object to try when I am free hehe

OK show us your best work with the app thanks. Most of those I saw looked like aliens rather than original ones.

 

[RestInPepperoni]

I've tried doing the scan, it does pretty well, even captures the texture on it quite decently. I think the best way to do it is to put the item on a flat surface, then u just turn the item instead of moving your camera, until all the blue parts on the picture is gone.

Edit: how do u guys upload photos that work ah

 

[athenodorus]

I've tried doing the scan, it does pretty well, even captures the texture on it quite decently. I think the best way to do it is to put the item on a flat surface, then u just turn the item instead of moving your camera, until all the blue parts on the picture is gone.

Edit: how do u guys upload photos that work ah

OK your this one looks good. How long u take to capture it?

 

[aallzz]

UAG Monarch black for M20P for 43$ only! . Mobile Hardware. I ordered on website but you can also whatsapp or call then. very good case!

 

[michaelakis]

I think I know what is the issue already. Nothing wrong with the screen protector. When I'm in an air con area and my fingers are very cold, I think there is no sweat / my finger becomes very dry and I always cant get the fingerprint reader to work. When I'm not in a very cold environment, my fingerprint works all the time.

I read online that we can counter this by also registering our fingerprints during cold conditions as additional fingerprints so it works in both normal and cold conditions. Some people have the same issue for older iPhones as well. Can give it a try.

How to go about doing that? If you try to register the same finger even in cold conditions phone will say fingerprint already registered.

 

[drmlxx]

kinda figured out what's with the green screen bleed... since ive been editing some wallpapers for my phone i can see some green bleed on my wallpaper even though usually when not in super dark situations cant see any green. so apparently, the green bleed only appears on some shades that normally, we would see black in normal situations. this applies to my reddit(night mode) also, the green tint only appear in the places not completely black... just an observation by me maybe does not apply to all lg screens but just mine

 

[AyuReady]

Another quickie scan in relatively dim lighting. Not sure if daylight be better for scanning

Think a more rigid object is easier to scan. No moving tails or ribbon.
Will test a rigid item soon for fun.

More like a novelty than for serious use. But good enuff to illustrate concept or mock up etc

V

I've tried doing the scan, it does pretty well, even captures the texture on it quite decently. I think the best way to do it is to put the item on a flat surface, then u just turn the item instead of moving your camera, until all the blue parts on the picture is gone.

Edit: how do u guys upload photos that work ah

 

[kaysee]

what kind of transparent case is it?

Think u can check out his fb link. Not sure if i am pasting the link correctly. Lol if not u go straight to fb search mobilelite

https://www.facebook.com/403649423024018/posts/2237012679687674/

Today first day use. Loving it so far.

 

[xuan123]

Another quickie scan in relatively dim lighting. Not sure if daylight be better for scanning

Think a more rigid object is easier to scan. No moving tails or ribbon.
Will test a rigid item soon for fun.

More like a novelty than for serious use. But good enuff to illustrate concept or mock up etc

V

Sorry just to ask, what app is this??? HAHAH is this the function HW was promoting during the keynote session?

 

[RestInPepperoni]

OK your this one looks good. How long u take to capture it?

like 1 minute? maybe another 30s to 1 minute for it to render

Sorry just to ask, what app is this??? HAHAH is this the function HW was promoting during the keynote session?

its the 3d live maker app, u can find in the huawei app gallery