[Official] Home Automation Thread

onionhead

Member
Joined
Jan 19, 2008
Messages
477
Reaction score
0
Actually, home assistant doesn't primarily use IFTTT. You need to install a web server at home. This can be via raspberry pi or on ur desktop pc.

All controls are done locally as it is the pc/pi that interfaces directly with ur devices over ur local LAN. Cloud only comes to play should u decide to use the alexa skill or IFTTT.

Ahh. I see. Which is why it commands fast.
 

bpsimm

Junior Member
Joined
Nov 26, 2004
Messages
30
Reaction score
0
Hi, I just received Aqara AC Companion 16A with gateway. I'm planning ask my AC servicing technician install it for my room Daikin AC.
However, my room Daikin AC power source behind wall on top of bathroom ceiling. Please click the link to check the photo.

photos.app.goo.gl/FCFC7sr8aYFddZA29

Is it still possible for Aqara AC Companion install for my Daikin AC?

What should I explain to AC technician to get him install for me?
 

AsusEpoxy

Master Member
Joined
Aug 3, 2003
Messages
3,438
Reaction score
23

AsusEpoxy

Master Member
Joined
Aug 3, 2003
Messages
3,438
Reaction score
23
Hi, I just received Aqara AC Companion 16A with gateway. I'm planning ask my AC servicing technician install it for my room Daikin AC.
However, my room Daikin AC power source behind wall on top of bathroom ceiling. Please click the link to check the photo.

photos.app.goo.gl/FCFC7sr8aYFddZA29

Is it still possible for Aqara AC Companion install for my Daikin AC?

What should I explain to AC technician to get him install for me?

the Ac companion works by being

1. A relay switch for the AC
2. Remote control hub for AC

Its designed for China where their use case scenario is that the power point of the AC is in room as opposed to in SG which is outside the room.

You will have to decide between 1 OR 2 and not have 1 AND 2 because Air Con uses infrared red IR signals which cannot penetrate walls.

However, its not theorectically impossible if you deploy an IR repeater as well. its gonna look ugly though.
 

bullfrog

Banned
Joined
Jan 1, 2000
Messages
18,188
Reaction score
1,152
Anyone installed curtain motor for your place?

Am currently looking at these 2

xiaomi aquara curtain motor + track + xiaomi gateway

and

dooya curtain motor + track

which one will you all recommend?

Understand that both these products can work with Alexa?

I'm using with this configuration

xiaomi aquara curtain motor + track + xiaomi gateway + home assistant

The xiaomi gateway doesn't work with the mihome skill for alexa. Need to use Home Assistant to bridge the xiaomi gateway to alexa
 
Last edited:

plustwo

Arch-Supremacy Member
Joined
Dec 28, 2009
Messages
12,689
Reaction score
580
anyone has suggestions for these problems i have with google assistant:

1. anyone on wifi is able to control non shared google home speakers even with guest casting disabled. very annoying.
2. can't add people to google home just as caged users or have them locked to specific rooms/devices.
2. can't set nicknames for rooms for different users so have to use impractical names for rooms. each user should be able to say "turn off lights in my room" and have it automatically select the right room instead of having to use "bedroom 1 etc."
 

boliao45

Member
Joined
Dec 1, 2007
Messages
388
Reaction score
7
The shared users is only applies to differentiate the content specific to each user, such as search results, calendar, etc. However, there's no specific grouping for home control, the current implementation is every one has access to everything. You may want to put in feedback direct to Google home support and if too many people feedback the same thing, they just might consider it for future updates.

anyone has suggestions for these problems i have with google assistant:

1. anyone on wifi is able to control non shared google home speakers even with guest casting disabled. very annoying.
2. can't add people to google home just as caged users or have them locked to specific rooms/devices.
2. can't set nicknames for rooms for different users so have to use impractical names for rooms. each user should be able to say "turn off lights in my room" and have it automatically select the right room instead of having to use "bedroom 1 etc."
 

StarLabs

Junior Member
Joined
Dec 3, 2018
Messages
1
Reaction score
0
Anyone using homey?

Just wondering if anyone managed to link broadlink ihc app with homey so that rf and ir signals can be used by homey?

Currently can only see learn IR command on homey..

Thanks :)
 

Gainduia

Member
Joined
Jan 2, 2012
Messages
253
Reaction score
12
New to home automation and wish to learn more for my new BTO.
Planning to pull neutral wires for all my light switches and getting Aqara light switch.

Configuration would be: Alexa-SmartThings-HomeAssistant-Switch.
Is this correct?
Possible to remove HomeAssistant in this step?
If wifi is down, can Aqara switch be operated manually?

For TV, Ceiling Fan, Air-con, planning to use RM Pro for control.
Configuration would be: Alexa-SmartThings-HomeAssistant-RM Pro-Devices.
Correct? Or is there a better ways to configure all?

Thanks all!
 

KoChi

Supremacy Member
Joined
Nov 5, 2001
Messages
7,030
Reaction score
5
anybody bought yeelight led strip? is it bright enough for living room? thinking of changing it from my led tube
 

bluez

Junior Member
Joined
Nov 22, 2004
Messages
40
Reaction score
0
anybody bought yeelight led strip? is it bright enough for living room? thinking of changing it from my led tube

If you are planning to just use yeelight led strip then I don't think it is bright enough. But if it is to just create the ambiance, then ok.
 

pustefix

Senior Member
Joined
Feb 6, 2012
Messages
537
Reaction score
10
Configuration would be: Alexa-SmartThings-HomeAssistant-Switch.
Is this correct?
Possible to remove HomeAssistant in this step?
If wifi is down, can Aqara switch be operated manually?

For TV, Ceiling Fan, Air-con, planning to use RM Pro for control.
Configuration would be: Alexa-SmartThings-HomeAssistant-RM Pro-Devices.
Correct? Or is there a better ways to configure all?

Usually you should choose SmartThings OR Homey OR HA+Xiaomi gateway. I don't see any advantage in combining SmartThings with HA. For SmartThings or Homey, you need to read up on compatibility with Aqara wall switch and RM Pro. As for Home Assistant, I am pretty sure it will work with Aqara wall switch and RM Pro.
 

pustefix

Senior Member
Joined
Feb 6, 2012
Messages
537
Reaction score
10
If you are planning to just use yeelight led strip then I don't think it is bright enough. But if it is to just create the ambiance, then ok.

Agree. You can consider the Yeelight Ceiling light for living room.
 

Gainduia

Member
Joined
Jan 2, 2012
Messages
253
Reaction score
12
Usually you should choose SmartThings OR Homey OR HA+Xiaomi gateway. I don't see any advantage in combining SmartThings with HA. For SmartThings or Homey, you need to read up on compatibility with Aqara wall switch and RM Pro. As for Home Assistant, I am pretty sure it will work with Aqara wall switch and RM Pro.

Thanks for the reply!

If I were to skip SmartThings,
I would go: Alexa-HA+Xiaomi gateway- MI Devices/ Aqara Switches?
For IR+RF devices, would be: Alexa-RM Pro-Devices?

As what I googled, is a hit and miss for SmartThings and Aqara Switches. RM Pro got no issue, can direct connect to Alexa.

Possible to share your setup? :)
 
Last edited:

doofie

Senior Member
Joined
May 21, 2000
Messages
1,990
Reaction score
14
Broadlink

anybody using broadlink latest version of remote control hub? Can't remember the exact model though. But I could only get it to be recognized in Google Home if i set all my devices as LAMP. But that's kind of lame as it's not true integration. Anybody has any other better ideas?
 

doofie

Senior Member
Joined
May 21, 2000
Messages
1,990
Reaction score
14
anyone using xiaomi hub and all it's devices? I'm planning to get their smart fan, bedside lamp, switch, etc and most importantly it must be integrated to google hub. Anyone tried this? any issues?
 

bullfrog

Banned
Joined
Jan 1, 2000
Messages
18,188
Reaction score
1,152
Thanks for the reply!

If I were to skip SmartThings,
I would go: Alexa-HA+Xiaomi gateway- MI Devices/ Aqara Switches?
For IR+RF devices, would be: Alexa-RM Pro-Devices?

As what I googled, is a hit and miss for SmartThings and Aqara Switches. RM Pro got no issue, can direct connect to Alexa.

Possible to share your setup?





:)

I'm using the following but i don't really recommend my configuration. Its just that i bought some of the items a long time ago and didn't want to replace them since they still work.

1) 5 x Alexa
2) 2 x Logitech harmony hub
3) 1 x smartthings v2
4) 1 x xiaomi gateway
5) 1x Hass.io (Home Assistant on raspberry pi)


Devices connected to my various gateways as follows:

smarthings(us) :
2 x first alert smoke detectors (z-wave)
1 x door contact sensor (z-wave)
2 x smarthings power plugs. (zigbee)

harmony hubs:
all my IR devices like tvs, aircons, fans & soundbar

Xiaomi gateway:
16 x aqara w neutral light switches
1 x xiaomi curtain motor.

I initially tried using smartthings to control my curtain motor but it was pretty limited. Also read that smartthings has problems getting the state of dual aqara switches.

Since smarthings and aqara integration were sketchy, i bought the xiaomi gateway and installed HA on my desktop first to see if I could set it up. HA is to get alexa to control aqara devices.

As of now, i am using the HA skill. It is possible to get HA to emulate a hue bridge so we need not subscribe to the skill but i kinda like the HA development and i think i want to support it for now..

Anyway after i got comfortable with HA on my desktop, i bought a pi and installed hass.io.

I spent most of this weekend learning how to include my harmony hubs and smarthings into hass.io and spent some time understanding how to configure the HA UI.

Needless to say, Alexa can control smarthings and harmony even before i added them into HA. But it is very neat now, as i can now control all my devices in one universal gui. Below is my setup




:)






OMj1NJB.jpg


My journey with HA far from over though. I still need to include my smoke sensors and door sensor into the gui. Will probably tackle that next weekend.
 
Last edited:

Gainduia

Member
Joined
Jan 2, 2012
Messages
253
Reaction score
12
Thanks for the reply and setup.
More clear now.

My plan is to get:
4xecho dot
1xRM Pro (LR setup)
2xbroadlink bean (MBR and studyroom)
1xsmartthings (door lock and ring doorbell)

Can the Aqara switch work manually if wifi is down?
How do we know if the appliances' remote device is IR or RF?
Does Harmony hub IR have to be line of sight with the remote? Remote have to be near the device right?
 
Last edited:

bullfrog

Banned
Joined
Jan 1, 2000
Messages
18,188
Reaction score
1,152
Thanks for the reply and setup.

Can the Aqara switch work manually if wifi is down?
How do we know if the appliances' remote device is IR or RF?
Does Harmony hub IR have to be line of sight with the remote? Remote have to be near the device right?

1) Yes

2) try using the devices remote when its pointed away. If still successful, its RF. If fails, its IR
:)

3) harmony hub is an IR blaster only. It needs to be within line of sight with all ur devices that you want to wish to control over IR.
 
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top