[Official] Home Automation Thread

coolnhappy

Banned
Joined
Sep 7, 2015
Messages
7,448
Reaction score
6
so after i gotten it, i burn the image to microsd and boot up.
can i run it headless and access via browser? means I don't connect it to display?

Can run headless, just use ssh to connect to it. But remember to put a file named 'SSH' inside the sdcard to enable ssh.
 

bullfrog

Banned
Joined
Jan 1, 2000
Messages
18,188
Reaction score
1,152
not burn the image then all the files there liao ah?

You can run headless from the moment it fully boots up.

What i did was, flash image, connect it to my LAN then boot up hassio. I connected to its webpage and installed the ssh add on. From there i could ssh access the /config directory to make my edits and file transfers. Screenshot of all my add-ons.

Of course, only install what you need






rBnEfQ1.jpg
 
Last edited:
Joined
May 11, 2017
Messages
62,282
Reaction score
11,756
You can run headless from the moment it fully boots up.

What i did was, flash image, connect it to my LAN then boot up hassio. I connected to its webpage and installed the ssh add on. From there i could ssh access the /config directory to make my edits and file transfers. Screenshot of all my add-ons.

Of course, only install what you need






rBnEfQ1.jpg

so you just add those in the screeshot to HA?
btw, does your raspberry feels hot when it's already deployed? No need fancy alu casing hor?
 

pustefix

Senior Member
Joined
Feb 6, 2012
Messages
537
Reaction score
10
so you just add those in the screeshot to HA?
btw, does your raspberry feels hot when it's already deployed? No need fancy alu casing hor?

You can go to the hass.io tab to add the add-ons. My pi is without heatsink but with a plastic case. I've read that heatsink is not required.
 

pustefix

Senior Member
Joined
Feb 6, 2012
Messages
537
Reaction score
10
Out of my 3 Aqara non-neutral switches, 2 of them are giving me problems. They will fickle when off but the worst one is that they will auto switch off after some time. I've one in the toilet and the light went off in the middle of the bath :-( I am going to replace it with the neutral ones to see if they are more reliable.
 
Joined
May 11, 2017
Messages
62,282
Reaction score
11,756
Out of my 3 Aqara non-neutral switches, 2 of them are giving me problems. They will fickle when off but the worst one is that they will auto switch off after some time. I've one in the toilet and the light went off in the middle of the bath :-( I am going to replace it with the neutral ones to see if they are more reliable.

Aqara = Xiaomi = zigbee right?
What adapter you're using?
 

pustefix

Senior Member
Joined
Feb 6, 2012
Messages
537
Reaction score
10
how come need 2 gateways?? thought 1 for each house should be ok?

One gateway can only support max 30 devices, I have more than 30. I also wanted to spread it out so that all devices have good signal, similar to adding wireless access point to cover the whole house.
 

bullfrog

Banned
Joined
Jan 1, 2000
Messages
18,188
Reaction score
1,152
Out of my 3 Aqara non-neutral switches, 2 of them are giving me problems. They will fickle when off but the worst one is that they will auto switch off after some time. I've one in the toilet and the light went off in the middle of the bath :-( I am going to replace it with the neutral ones to see if they are more reliable.

So far, my 16 Aqara with neutral switches have been working well for me. But i've only had them installed at the end of July.
 
Last edited:

bullfrog

Banned
Joined
Jan 1, 2000
Messages
18,188
Reaction score
1,152
Aqara = Xiaomi = zigbee right?
What adapter you're using?

Yep, but for Aqara, best to use the xiaomi gateway to manage the switches.
Otherwise, getting the state of the switches isn't very accurate with 3rd party products (like smartthings). HA can also talk to the gateway.
 
Last edited:

plustwo

Arch-Supremacy Member
Joined
Dec 28, 2009
Messages
12,689
Reaction score
580
for those that used for a long time, how long does the battery last for aqara devices btw?
 

A.DelPiero10

Member
Joined
Apr 13, 2011
Messages
177
Reaction score
1
Not all Z wave devices are compatible. Depends on region, and even so, it’s quite touch and go.

That’s why in the end I left it up to the pros to spec my house because all the things I initially proposed to them, they said will not work. The pros know what definitely works, and what works better than others and which version of softwares to stick to to avoid issues.

where u get ur zwave module from?
My US yale lock / z wave module and US smarthing hub work right out of the box, after switching to Vera it work fine too.

zwave is tricky. different regions are allocated different frequencies.

See your Yale lock what frequencies it's operating for zwave and whether it matches your ST Hub.

Thanks for the reply guys.
the lock I got it locally.
The zwave module for the lock and the samung hub i got from Amazon UK.
And I finally figure it out during the holiday period, when I was clearing leave and stay at home figuring out haha.

At one moment I decided to reboot the hub, and I saw it blinking green led.
Then I can successfully detect the lock zwave module and add it.
Previously the led is blinking blue but I am able to see it on my phone app so I thought it is working.
Apparently the green led is the correct status.
 

tazy_tazy

Senior Member
Joined
Apr 22, 2002
Messages
780
Reaction score
55
Hi Guys, anyone did home automation such as if there is rain, it will auto send alarm to your phone to wake u up?

Currently sleeping in the room with air con, every night have to close all window in case of rain...
 

bullfrog

Banned
Joined
Jan 1, 2000
Messages
18,188
Reaction score
1,152
Hi Guys, anyone did home automation such as if there is rain, it will auto send alarm to your phone to wake u up?

Currently sleeping in the room with air con, every night have to close all window in case of rain...

There are apps for that. Try rain alarm? its on playstore. Dunno how effective it is though
 
Last edited:

tian800

Junior Member
Joined
May 7, 2018
Messages
61
Reaction score
3
For those who did their neutral wire. Did u guys pulled the neutral wire through the existing concealed routing (not sure if it's even possible) or just lay new trunking from the power point to the switch?
 

bullfrog

Banned
Joined
Jan 1, 2000
Messages
18,188
Reaction score
1,152
For those who did their neutral wire. Did u guys pulled the neutral wire through the existing concealed routing (not sure if it's even possible) or just lay new trunking from the power point to the switch?

For my previous place, it was exposed wiring(HDB) . So i pulled out the furniture, opened the trunking and laid a neutral wire from my lighting point to its respective light switch. Did that for where i wanted intelligent switches.

My current home has buried wiring. The wires are running inside conduits in the wall. My electrician simply pushed the neutral wire from the lighting point to the light switch. He just kept pushing until it showed up at the switch point. It was astonishingly easier than my previous place.
 
Last edited:

pajamasguy

Junior Member
Joined
Sep 28, 2007
Messages
83
Reaction score
0
Hi Guys, anyone did home automation such as if there is rain, it will auto send alarm to your phone to wake u up?

Currently sleeping in the room with air con, every night have to close all window in case of rain...
Use IFTTT but your room may already be flooded by the time you get the message :)

ifttt.com/search/query/rain%20alert
 
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top