[Official] Home Automation Thread

tian800

Junior Member
Joined
May 7, 2018
Messages
61
Reaction score
3
Can you please pm me his contact and the rates he quoted to you? Most of the electrician I find either dunno how to lay the neutral or never heard of laying neutral or tell me they will need to do trunking fly here and there, cannot run inside conceal. Thanks alot!

For my previous place, it was exposed wiring(HDB) . So i pulled out the furniture, opened the trunking and laid a neutral wire from my lighting point to its respective light switch. Did that for where i wanted intelligent switches.

My current home has buried wiring. The wires are running inside conduits in the wall. My electrician simply pushed the neutral wire from the lighting point to the light switch. He just kept pushing until it showed up at the switch point. It was astonishingly easier than my previous place.
 

bullfrog

Banned
Joined
Jan 1, 2000
Messages
18,188
Reaction score
1,152
I'm still thinking if i should get Z-stick ( zwave ) or
something that has ( zwave and zigbee )

In theory combo is better. However, from my experience, generic gateways are hardly used. Most of these devices have their own gateway. And its better to use them than a generic one. Otherwise, you will find that they can only function a fraction of their advertised abilities.

And if you plan on aqara switches, buy the xiaomi gateway instead of a generic zigbee device.
 
Joined
May 11, 2017
Messages
62,282
Reaction score
11,756
In theory combo is better. However, from my experience, generic gateways are hardly used. Most of these devices have their own gateway. And its better to use them than a generic one. Otherwise, you will find that they can only function a fraction of their advertised abilities.

And if you plan on aqara switches, buy the xiaomi gateway instead of a generic zigbee device.

nola... not planning on aqara just to future proof. i already have all my switches layed,, as mentioned just changing the hub nia..

so for zwave, the aeotec stick is tried and tested and is the one to work very closely with HA ?
 

bullfrog

Banned
Joined
Jan 1, 2000
Messages
18,188
Reaction score
1,152
Joined
May 11, 2017
Messages
62,282
Reaction score
11,756

iceJman

Member
Joined
Oct 1, 2009
Messages
156
Reaction score
0
How about using a water leak sensor? If it rains, the collected water will trigger the alarm.

I've tried the aqara water leak sensor. Haa, but due to some shelter covering my windows, the sensor will only trigger when there's super duper heavy rain. The sensor needs certain minimum amount of water to trigger. Fyi, I've placed the sensor outside, below the window at a 45 degree angle.
Here's the original idea :
If water leak sensor detect rains & windows are open -> close window blinds to prevent rain from splashing in :D
 

tazy_tazy

Senior Member
Joined
Apr 22, 2002
Messages
780
Reaction score
55
I was thinking of that too. By then, there is flood in the house already.

Anyone looking for Aqara double neutral switch, I got extra 15 pieces to let go. Bought too much

I've tried the aqara water leak sensor. Haa, but due to some shelter covering my windows, the sensor will only trigger when there's super duper heavy rain. The sensor needs certain minimum amount of water to trigger. Fyi, I've placed the sensor outside, below the window at a 45 degree angle.
Here's the original idea :
If water leak sensor detect rains & windows are open -> close window blinds to prevent rain from splashing in :D
 

iceJman

Member
Joined
Oct 1, 2009
Messages
156
Reaction score
0
Think can hack the xiaomi wireless switch to this :D

https://www.aliexpress.com/item/Rai...lgo_pvid=dea68f32-a82c-4988-85e4-beff72fc6647

KOYLfc6.jpg
 

R4stafari

Junior Member
Joined
Jan 3, 2019
Messages
11
Reaction score
0
Hi.. can u pm the electrician that help u donup the neutral wire and how much he quote for the job?

For my previous place, it was exposed wiring(HDB) . So i pulled out the furniture, opened the trunking and laid a neutral wire from my lighting point to its respective light switch. Did that for where i wanted intelligent switches.

My current home has buried wiring. The wires are running inside conduits in the wall. My electrician simply pushed the neutral wire from the lighting point to the light switch. He just kept pushing until it showed up at the switch point. It was astonishingly easier than my previous place.
 

pustefix

Senior Member
Joined
Feb 6, 2012
Messages
537
Reaction score
10
I've just added bus timing in Home Assistant and with text to speech, I am able to let Google Home say when my bus is coming. It sure beats checking the timing on mobile app once every few minutes.
 
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top