[Official] Home Automation Thread

JackDulouz

Supremacy Member
Joined
Aug 12, 2002
Messages
5,432
Reaction score
57
Where to find this etouch 20A locally? I checked TB also no have..

Just a etouch 20A switch to replace your existing mechanical switch & a broadlink RM pro to control.
Below 100 can settle

Sent from HUAWEI BLA-L29 using GAGT
 

iceJman

Member
Joined
Oct 1, 2009
Messages
156
Reaction score
0
Control Google home devices with Xiaomi Xiao Ai

Controlling the Brunt Blind Engine (google home) via Xiaomi Xiao AI automation scene :D

The automation scene will turn on the TV power & TV console power & switch on TV + close the window blinds (to reduce glare from sunlight)

Another automation scene will switch off the TV and open the windows blinds

https://soundcloud.com/icejman/control-google-home-devices-with-xiaomi-xiao-ai
 

viix

Master Member
Joined
Nov 17, 2001
Messages
3,236
Reaction score
2
How to do the connection? I don't mind if it can work

U can use any door sensor or fibaro universal module to connect to the rain sensor. Online a lot of tutorials. Basically a drop of water on the PCB will close the circuit.
It works but this devices usually drains the sensor batteries fast..

does it take a long time to reach SG?

Why not get from RS COMPONENT? Local price and shipping not much higher than China.
Can get it in 1 week
What do you use for your automation ?

Athom Homey


Hi Senior Bros,

Anyone here can advise on the switch for Tank-type water heater, or how to automate the water heater? Cos been reading on some switches, including Sonoff/Tplink/etc.. and most stated either 13A/2.99Kw or 16A/3.5Kw.. But i believe tank water heater uses 20A? :s11::s11:

Idea is to be able to on/off the water heater when away from home using mobile phone. Absolutely nothing to start off with, so if bros can also advise a proven setup, will be very grateful. Thanks!:s12:

Where to find this etouch 20A locally? I checked TB also no have..

Don’t trust all these 20A capacitative switch. So much current running through it. Just get a contactor and run it via that. Contractor very cheap. less than 30bux from CCM
 
Last edited:

Jas007

Supremacy Member
Joined
Nov 23, 2002
Messages
9,513
Reaction score
290
when i was looking to buy my first ones i too
was gunning for PH
but some items OOS
i looked to Shopee, and found $$ to be cheaper
bought 3 first to try, and delivery was pretty quick !
over the 11-11, BF, 12-12 sales, i bought a few more from the same seller ...
https://shopee.sg/zeyue.sg/1432404334?version=b3855cbe96910914596a73daad08f5d7

If it helps, i got my aqara switches & xiaomi gateway from here

https://passionhome.sg/product-category/smart-input-and-output-devices/
 

pustefix

Senior Member
Joined
Feb 6, 2012
Messages
537
Reaction score
10

AsusEpoxy

Master Member
Joined
Aug 3, 2003
Messages
3,438
Reaction score
23
Hi Senior Bros,

Anyone here can advise on the switch for Tank-type water heater, or how to automate the water heater? Cos been reading on some switches, including Sonoff/Tplink/etc.. and most stated either 13A/2.99Kw or 16A/3.5Kw.. But i believe tank water heater uses 20A? :s11::s11:

Idea is to be able to on/off the water heater when away from home using mobile phone. Absolutely nothing to start off with, so if bros can also advise a proven setup, will be very grateful. Thanks!:s12:

There is the E touch 20A, but for water heater, i believe you might be cutting it too close cos you have to factor in the peaks and surges.. Some people have also used Sonoff POWs (16A) with failure as well.

When it comes to high current devices , either u go for a contactor or higher amp relay switch. If you are smartthings inclined, you should seriously consider the Aeotec Heavy Duty switch. It's rated for 40A and since Aeotec is reputable in the HA market, there is the quality as well.
 

sellun

Senior Member
Joined
Feb 15, 2013
Messages
1,487
Reaction score
51
You can see your heater spec sheet to find out the power consumption. My aosmith 50L tank uses power of 2kw to 3kw. So max current only around 13A. And I don't really use the boost function for max power.

Sent from HUAWEI BLA-L29 using GAGT
 

Jas007

Supremacy Member
Joined
Nov 23, 2002
Messages
9,513
Reaction score
290
not this seller, but i bought something supposedly from SONOFF ...
a wireless switch (like Aqara) to control my Sonoff Basic
the item arrived without instructions, nor box
cannot be paired ... and i was beginning to suspect it’s a bogus item
contacted seller reg returns
gave me some stupid looking long return address
i contacted Shopee for assistance cos i not going to return the item knowing it’ll be lost in the mail ... forfeiting my return + return shipping cost
hoping Shopee will withhold payment ... though unlikely
later i came across same item sold on Lazada
2 buyers feedback the item didn’t work as intended
luckily item is only $7 ...
and it isn’t from Sonoff ... who have yet to reply to my mail reg the item also 🤣🤣🤣

I also buy from the same Shopee seller. The items are cheaper and the deliveries are pretty quick. I don't know the return policy though as I have yet to return anything.
 

Elon Jobs

Senior Member
Joined
Jun 22, 2018
Messages
2,434
Reaction score
1,261
not this seller, but i bought something supposedly from SONOFF ...
a wireless switch (like Aqara) to control my Sonoff Basic
the item arrived without instructions, nor box
cannot be paired ... and i was beginning to suspect it’s a bogus item
contacted seller reg returns
gave me some stupid looking long return address
i contacted Shopee for assistance cos i not going to return the item knowing it’ll be lost in the mail ... forfeiting my return + return shipping cost
hoping Shopee will withhold payment ... though unlikely
later i came across same item sold on Lazada
2 buyers feedback the item didn’t work as intended
luckily item is only $7 ...
and it isn’t from Sonoff ... who have yet to reply to my mail reg the item also 🤣🤣🤣

I prefer Lazada because their return/refund policy much more favourable to buyers than sellers.
 

Jas007

Supremacy Member
Joined
Nov 23, 2002
Messages
9,513
Reaction score
290
whilst on the topic of switches ...
i actually prefer SONOFF ...
but i don’t like their touch switch, prefer Aqara toggle type
but for setup, no need gateway ... straightaway can interact with Alexa !
The pairing of SONOFF devices is best done thru their Compatible method, works a charm every time ... the standard pairing method isn’t reliable ...

btw, if your SONOFF Touch Switch isn’t responsive ...
just google for a solution ...
my 1 and only switch needed intervention
 

Jas007

Supremacy Member
Joined
Nov 23, 2002
Messages
9,513
Reaction score
290
Lazada ... i find their stuff more ex !
upgrading to home automation ex lol
mine started all bcos i bought the XM Robot Vacuum ... and found i could control via Alexa which had been sitting idle since BF 2017 !
lol and behold ... i started buying stuff that i have yet to open up to setup lol
a 2nd Alexa, Harmony Hub, and still to buy a Raspberry cos i wasn’t aware at that time Aqara cannot interface with Alexa & GH

I prefer Lazada because their return/refund policy much more favourable to buyers than sellers.
 

fremen

Junior Member
Joined
Feb 16, 2008
Messages
24
Reaction score
0
I've just added bus timing in Home Assistant and with text to speech, I am able to let Google Home say when my bus is coming. It sure beats checking the timing on mobile app once every few minutes.

Hi able to share the ymal script? Thanks!
 
Joined
May 11, 2017
Messages
62,282
Reaction score
11,756
You intend to use ZigBee Xiaomi ah?

Lazada ... i find their stuff more ex !
upgrading to home automation ex lol
mine started all bcos i bought the XM Robot Vacuum ... and found i could control via Alexa which had been sitting idle since BF 2017 !
lol and behold ... i started buying stuff that i have yet to open up to setup lol
a 2nd Alexa, Harmony Hub, and still to buy a Raspberry cos i wasn’t aware at that time Aqara cannot interface with Alexa & GH
 

pustefix

Senior Member
Joined
Feb 6, 2012
Messages
537
Reaction score
10
Hi able to share the ymal script? Thanks!

You need to get AccountKey by registering with LTA, https://www.mytransport.sg/content/mytransport/home/dataMall.html

Code:
sensor:
  - platform: rest
    resource: http://datamall2.mytransport.sg/ltaodataservice/BusArrivalv2?BusStopCode=83139
    name: Next Bus
    value_template: "{{((as_timestamp(value_json['Services'][0]['NextBus']['EstimatedArrival'])-as_timestamp(now()))//60)|int}}"
    headers:
      AccountKey: XXXX

Another forum member uses a proxy to LTA API, there is no need to register, https://github.com/cheeaun/arrivelah. The resource and value_template will have to be adjusted accordingly.
 
Last edited:

SaLvAtoOo

Supremacy Member
Joined
Sep 2, 2000
Messages
5,815
Reaction score
17
You need to get AccountKey by registering with LTA, https://www.mytransport.sg/content/mytransport/home/dataMall.html

Code:
sensor:
  - platform: rest
    resource: http://datamall2.mytransport.sg/ltaodataservice/BusArrivalv2?BusStopCode=83139
    name: Next Bus
    value_template: "{{((as_timestamp(value_json['Services'][0]['NextBus']['EstimatedArrival'])-as_timestamp(now()))/60)|round(0)}}"
    headers:
      AccountKey: XXXX

Another forum member uses a proxy to LTA API, there is no need to register, https://github.com/cheeaun/arrivelah. The resource and value_template will have to be adjusted accordingly.

thanks for the SIC
 

bullfrog

Banned
Joined
Jan 1, 2000
Messages
18,188
Reaction score
1,152
Those of u running hassio, any issues when you unplug its power without shutting down nicely? I realise after doing that for a few times, my hassio became unstable. Suspect the OS file system became corrupted.

I took a snapshot of my config, reflashed hassio, copied back the snapshot and restored it.

Its stable again.

Looks like i have to treat it like a proper server and not anyhow unplug/plug.
 

SaLvAtoOo

Supremacy Member
Joined
Sep 2, 2000
Messages
5,815
Reaction score
17
Those of u running hassio, any issues when you unplug its power without shutting down nicely? I realise after doing that for a few times, my hassio became unstable. Suspect the OS file system became corrupted.

I took a snapshot of my config, reflashed hassio, copied back the snapshot and restored it.

Its stable again.

Looks like i have to treat it like a proper server and not anyhow unplug/plug.

maybe try a better sd card? i dont shutdown hass.io
 
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top