[Official] Home Automation Thread

Elon Jobs

Senior Member
Joined
Jun 22, 2018
Messages
2,434
Reaction score
1,261
Thanks so much, thats very helpful.

Just take note- Korean blinds are double layered so they’re kind of heavy for the motor I’ve recommended. I would suggest regular blinds (like the one seen in those YouTube videos I’ve linked).
 

blackswan555

Junior Member
Joined
Apr 4, 2017
Messages
31
Reaction score
0
What about athom homey? I am thinking of using them as my smart hub to link all my devices, but heard that athom homey uses WIFI and if wifi down can't control your lights etc via your mobile? Or can?

So if ask electrician to put the neutral wire there will be additional charges on top of the current charged?
 

viix

Master Member
Joined
Nov 17, 2001
Messages
3,236
Reaction score
2
What about athom homey? I am thinking of using them as my smart hub to link all my devices, but heard that athom homey uses WIFI and if wifi down can't control your lights etc via your mobile? Or can?

So if ask electrician to put the neutral wire there will be additional charges on top of the current charged?

All hub use wifi to connect to your mobile. I think you are asking if wifi is down, can you still control your devices. You can control all the non wifi devices. Mobile app can’t be used but no issue with physician buttons.. it’s all about how you connect your device together. Homey has a few interface so u can link Zwave with zigbee by setting up triggers and flows without the need for wifi (mobile control) ie an aqara wireless switch can control a Zwave wall socket that is hardwired to the light etc..

The plus point with homey is I can buy most of the available brand of HA stuff to use with homey as Long as a driver is written for it. I have sonoff, broadlink, aqara, xiaomi and even Zwave fibaro and Neo coolcam stuff all linked up. Not tied down to any brand or system.

If you know abit of json u can even write scripts and access APIs to trigger automation. Ie SG weather or connect to devices with open APIs.

For you second question, yes. Unless you running new power cables, he will just run extra neutral beside it with little to no extra charge. Pulling neutral to existing definately will be charged.
 
Last edited:

pustefix

Senior Member
Joined
Feb 6, 2012
Messages
537
Reaction score
10
an aqara wireless switch can control a Zwave wall socket that is hardwired to the light etc..

Do you still need the Aqara gateway for initial setup of Aqara sensors like door or motion sensor using Homey?
 

viix

Master Member
Joined
Nov 17, 2001
Messages
3,236
Reaction score
2
Do you still need the Aqara gateway for initial setup of Aqara sensors like door or motion sensor using Homey?

no other gateway needed. the aqara sensors pair direct to Homey as the gateway.
 

argento

Junior Member
Joined
Jul 3, 2003
Messages
16
Reaction score
0
Guys,
Does anyone have a curtain installer to recommend ? I bought the dt82 tracks from AliExpress but it’s been a huge pain to install and am now looking for help. Any suggestions would be much appreciated.
 

AsusEpoxy

Master Member
Joined
Aug 3, 2003
Messages
3,438
Reaction score
23
tbh, the only thing stopping me from getting the homey is the price. It's $599 and is not exactly wallet friendly for those who just want to get their feet wet into this HA scene.
 

bullfrog

Banned
Joined
Jan 1, 2000
Messages
18,188
Reaction score
1,152
Guys,
Does anyone have a curtain installer to recommend ? I bought the dt82 tracks from AliExpress but it*********s been a huge pain to install and am now looking for help. Any suggestions would be much appreciated.

Did you buy curved or straight? Is it too long or too short? What exactly is the problem. What I did was assemble it on the floor and got my curtain people to install it.

My bigger challenge is my master bedroom as that has a wide curve. The 90 degree bend that I brought doesn't follow the bend property. Now am experimenting on different curved joints.

Once I settle it and reassemble everything will get my curtain people to mount it too.

Unfortunately, I have yet to configure my smarthings for my aqara devices as I just unboxed my smarthings from storage yesterday.

Ohh and get additional eye hooks. What they provided when I ordered my rails was not enough for my curtains.
 
Last edited:

viix

Master Member
Joined
Nov 17, 2001
Messages
3,236
Reaction score
2
Does anyone know if there is a limit to the number of awards devices that homey can handle ?

max is 231 zwave devices (here)... zigbee at the moment is 20 due to the open source zigbee core they used.. should be fixed in the next 2.0 firmware update.

I'm at 38 zwave and 16 zigbee devices.. don't think u will reach the maximum unless your house has 20 rooms.. mostly switches, sensors.. wifi device also have a few rm minis and 1 rm pro that I had. Only using it to control 1 rf fan that I hope someone can write an app for homey to record and play that signal.

Guys,
Does anyone have a curtain installer to recommend ? I bought the dt82 tracks from AliExpress but it’s been a huge pain to install and am now looking for help. Any suggestions would be much appreciated.

What issue are you experiencing? Isn't it assemble on the floor, then install the centre locking bracket (if it's 2 piece) and get friends to help lift up while u install? Only downside is the bracket they provide need people to hold the rail while drilling..
 

viix

Master Member
Joined
Nov 17, 2001
Messages
3,236
Reaction score
2
tbh, the only thing stopping me from getting the homey is the price. It's $599 and is not exactly wallet friendly for those who just want to get their feet wet into this HA scene.

Well, one could go for the cheaper option but limiting the peripheral you can connect to. I was in the same boat too.. deciding between all the HA options and weigh the connectivity to price..

Anyway I believe there might be some promo with the MCO switches which offsets the price quite a bit. U also need to compare zwave to zwave hub. Of course smart things is cheap now but when I got it, smart things wasn't easily available yet and the nearest was the HCL which sucks and homey was a clear winner.. I think I paid <$200 for it when bundled with my MCO switches so painful one time only..


Did you buy curved or straight? Is it too long or too short? What exactly is the problem. What I did was assemble it on the floor and got my curtain people to install it.

My bigger challenge is my master bedroom as that has a wide curve. The 90 degree bend that I brought doesn't follow the bend property. Now am experimenting on different curved joints.

Once I settle it and reassemble everything will get my curtain people to mount it too.

Unfortunately, I have yet to configure my smarthings for my aqara devices as I just unboxed my smarthings from storage yesterday.

Ohh and get additional eye hooks. What they provided when I ordered my rails was not enough for my curtains.

They provide 8 per meter actually its enough. I ask for 12 per meter but only used 10 and I already feel it's too much. when the curtain is at the open position, the 2 sides can be quite wide with too many rollers and curtains bunching up together.. Instead, I got the curtain contractor to sew more french pleats between the hook points and the curtain looks better..
 
Last edited:

argento

Junior Member
Joined
Jul 3, 2003
Messages
16
Reaction score
0
If it helps. I just bought my homey online for 2/3rd the local price from a European website. No local warranty though and still not cheap compared with smart things.

Adding the aqara devices directly was dead simple and so was the integration with Alexa.

tbh, the only thing stopping me from getting the homey is the price. It's $599 and is not exactly wallet friendly for those who just want to get their feet wet into this HA scene.
 

tazy_tazy

Senior Member
Joined
Apr 22, 2002
Messages
780
Reaction score
55
Can pm me the site?

If it helps. I just bought my homey online for 2/3rd the local price from a European website. No local warranty though and still not cheap compared with smart things.

Adding the aqara devices directly was dead simple and so was the integration with Alexa.
 

Aftermarket

Junior Member
Joined
Apr 7, 2018
Messages
4
Reaction score
0
If it helps. I just bought my homey online for 2/3rd the local price from a European website. No local warranty though and still not cheap compared with smart things.

Adding the aqara devices directly was dead simple and so was the integration with Alexa.
PM the site bro.
 

IloveEmma

Senior Member
Joined
Nov 13, 2013
Messages
1,186
Reaction score
0
Hi Guys,

Been reading half of the thread here and from everyway about automation but very confused now.

I want to try to control my room aircon with temperature and humidity sensor from xiaomi. So I will need to get Xiaomi GW + Temperature Sensor + RM pro for infra controlling? With this, I use the xiaomi home app set routine to control my aircon? Will xiaomi app/GW be able to use RM pro?
 

viix

Master Member
Joined
Nov 17, 2001
Messages
3,236
Reaction score
2
Hi Guys,

Been reading half of the thread here and from everyway about automation but very confused now.

I want to try to control my room aircon with temperature and humidity sensor from xiaomi. So I will need to get Xiaomi GW + Temperature Sensor + RM pro for infra controlling? With this, I use the xiaomi home app set routine to control my aircon? Will xiaomi app/GW be able to use RM pro?

Xiaomi cannot talk to broadlink. Not sure if you can even set automation rules to other apis like ifttt but Xiaomi has their own air con IR blaster. Thing is to check whether it has the remote codes for your ac or not and if you can use sg server or China server..
 

pustefix

Senior Member
Joined
Feb 6, 2012
Messages
537
Reaction score
10
I want to try to control my room aircon with temperature and humidity sensor from xiaomi?

I've the exact same setup, Xiaomi GW, temperature sensor, Broadlink rm mini (if you don't need RF, use mini instead of pro). However I use Home Assistant to make them work together.

Another way is to go all Xiaomi products, buy Xiaomi IR blaster instead of Broadlink. You should use China server for better device support. I don't know how complicated are your automation but simple ones should be supported in MiHome app.
 
Last edited:
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top