Ryzen System with Windows 7?

[croc1977]

Answered you on this before.


Essentially the same. No difference. As long as you got mount fans near the rear exhaust of the chassis, promoting some airflow around the vrm area will do.

Sent from OnePlus ONEPLUS A3003 using GAGT

so should i request to mount 2 120mm fan on the rear?

 

[singupingu]

so should i request to mount 2 120mm fan on the rear?

Don't need. You got 2x 140mm pre-mounted at the front, 1x 120mm pre-mounted at the rear. Your AIO have 2 more 120mm fans.

Initially I wanted to suggest you to mount your AIO on top as exhaust, but upon closer look at the Tecware Nexus website and pics, I think there isn't enough space. So, I'd suggest you to mount the AIO in front, shifting both the 140mm fans to the top. Given you have 5 fans, you might need a couple of y-splitters for the fans. Control the fan curves a bit, lower the speed of those exhaust fans to maintain a better balance of airflow instead of negative airflow by default.

Sent from OnePlus ONEPLUS A3003 using GAGT

 

[Golden_Fox]

Bookmark thread. I'm thinking of using win 7 and Ryzen as well

 

[croc1977]

Bookmark thread. I'm thinking of using win 7 and Ryzen as well

ok will update you guys once is done...

now left casing cos i going to refund the tecware one cos i found out no 5 1/4 bay for my audigy and sentry 3...

after that will buy a cm silencio 452 instead or FD Fr200...notice now the deisgn most no more 5/14 bay and all put fan nia

 

[-Synchronicity-]

Bookmark thread. I'm thinking of using win 7 and Ryzen as well

Most of our advise is... don't

 

[singupingu]

ok will update you guys once is done...

now left casing cos i going to refund the tecware one cos i found out no 5 1/4 bay for my audigy and sentry 3...

after that will buy a cm silencio 452 instead or FD Fr200...notice now the deisgn most no more 5/14 bay and all put fan nia

Buy Fractal Design Focus G ATX pls. The CM silencio is CMI

Sent from OnePlus ONEPLUS A3003 using GAGT

 

[Golden_Fox]

Most of our advise is... don't

Let me know read through the thread first Maybe I'll use Intel again.

 

[croc1977]

Buy Fractal Design Focus G ATX pls. The CM silencio is CMI

Sent from OnePlus ONEPLUS A3003 using GAGT

this one actually was on my mind till the SSD removal is a issue...read the review

 

[croc1977]

Let me know read through the thread first Maybe I'll use Intel again.

coffee lake sarpork 7??

 

[Golden_Fox]

coffee lake sarpork 7??

No idea leh. I still on Haswell

 

[singupingu]

this one actually was on my mind till the SSD removal is a issue...read the review

That one minor point cannot be compared to the Silencio's absence of top exhaust outlet. Plus, that SSD can pre-mount then cable route comes later.

Also, can get modular psu, so if you need to remove it, you can just remove the modular heads and remove the psu and ssd. You can mount the ssd to the 3.5 inches trays too.

It's very easy to tackle where as the Silencio is obsolete design problem and cannot be rectified.

Sent from OnePlus ONEPLUS A3003 using GAGT

 

[Ferolare]

coffee lake sarpork 7??

last native support of win7 for intel is skylake

 

[croc1977]

That one minor point cannot be compared to the Silencio's absence of top exhaust outlet. Plus, that SSD can pre-mount then cable route comes later.

Also, can get modular psu, so if you need to remove it, you can just remove the modular heads and remove the psu and ssd. You can mount the ssd to the 3.5 inches trays too.

It's very easy to tackle where as the Silencio is obsolete design problem and cannot be rectified.

Sent from OnePlus ONEPLUS A3003 using GAGT

but in future if i need to remove the ssd i need to remove board rite?

CM N400 ok?

 

[singupingu]

but in future if i need to remove the ssd i need to remove board rite?

CM N400 ok?

PSU bro, not MOBO. Hence I ask you to buy modular PSU. Anyway, how often do you need to take out the SSD until you would think that that's a major shortcoming? For the SSD you Wanna change often, I suggest you put it to the 3.5 inches tray. Let the permanent one be at the back of the PC.

N400 still okay. One of the more acceptable design of Cooler Master chassis.

Sent from OnePlus ONEPLUS A3003 using GAGT

 

[croc1977]

PSU bro, not MOBO. Hence I ask you to buy modular PSU. Anyway, how often do you need to take out the SSD until you would think that that's a major shortcoming? For the SSD you Wanna change often, I suggest you put it to the 3.5 inches tray. Let the permanent one be at the back of the PC.

N400 still okay. One of the more acceptable design of Cooler Master chassis.

Sent from OnePlus ONEPLUS A3003 using GAGT

think i narrow to coasir 200r and n400....


i bot one is semi mod....not full mod

 

[singupingu]

think i narrow to coasir 200r and n400....


i bot one is semi mod....not full mod

I'd say the N400 is better than the 200R. Mesh front for better airflow.

Sent from OnePlus ONEPLUS A3003 using GAGT

 

[croc1977]

all above mention casing does not work with 240 radiator and B450 m/b so have to scarifies 5 1/4 bays with CM510L...

Already got it ...now trying out windows 7 patcher cos boot up usb does not work

 

[singupingu]

all above mention casing does not work with 240 radiator and B450 m/b so have to scarifies 5 1/4 bays with CM510L...

Already got it ...now trying out windows 7 patcher cos boot up usb does not work

Who tell you they don't support 240mm radiator with B450? I don't understand how is it not compatible?

Sent from OnePlus ONEPLUS A3003 using GAGT

 

[croc1977]

Who tell you they don't support 240mm radiator with B450? I don't understand how is it not compatible?

Sent from OnePlus ONEPLUS A3003 using GAGT

PCT...cos the heatsink on the top very near to radiator ...


I even wanted to purchase cosair 300R but also can't so have to scarifies on 5 1/4 bay

 

[singupingu]

You can mount it in front what

Sent from OnePlus ONEPLUS A3003 using GAGT