kwokweng76
Member
- Joined
- Feb 12, 2012
- Messages
- 490
- Reaction score
- 0
How do u download from Terafile? the site sucks 
(Download the attachment from here: xda-developers - View Single Post - SUCCESS !!! Knox 0x0 with Mobile Odin Pro 3.85 !!!)
Here's the procedure for going from a fully rooted ML2 (or possibly MJ7 and before) to 4.4.2 KitKat:
1) Obtaining the firmware files.
Download the full official firmware from:
Firmwares | SamMobile
Search for "N9005" and download the Singapore (StarHub) 4.4.2 firmware.
2) Obtaining Odin 3.09 and the BL (bootloader) files.
Download the attachment below this post. It contains:
-Odin 3.09
-package.tar.md5 (which is the BL to be flashed).
3) Mobile Odin Pro 4
You'll need to download and install Mobile Odin Pro 4 for KitKat support and its ability to boot into Download mode (Odin mode) after flashing the main firmware (in order to flash the BL, as MOP doesn't support flashing of BL).
4) Flashing the main firmware
Extract the firmware file (N9005XXUENA6_N9005OLBENA2_N9005XXUENA2_HOME.tar.md5) into your phone memory.
Run Mobile Odin Pro 4 and click on Open file....
Choose the firmware file from your Internal SD-card.
Make sure that EverRoot, Inject SuperSU, and Inject Mobile ODIN are all checked.
Tick Wipe Dalvik cache.
Select After flash ... and choose Download mode
Flash!
5) Flashing the Bootloader
Your phone would automatically reboot a few times and finally end up in Download mode.
Extract the contents of the attachment somewhere.
From there, connect your phone to your PC and run Odin 3.09.
Click on BL and select package.tar.md5, and uncheck F. Reset Time and check Phone Bootloader Update.
(I didn't uncheck F. Reset Time and Phone Bootloader Update but it worked anyway).
Click on Start.
6) Success!
Your phone should be rooted, running KitKat 4.4.2, and with Knox Warranty 0x0!
Congratulations!
(Download the attachment from here: xda-developers - View Single Post - SUCCESS !!! Knox 0x0 with Mobile Odin Pro 3.85 !!!)

damn I'm stuck!!! btw samsung keyboard working again.