
Hmmm... Once on Mixed B/G/N mode, most router's performance drop tremendously.Is it just me on the iPhone 4, as far as wifi throughout is concerned, that channels 5 to 8 yield the best performance where downlink > uplink.
If I may elaborate, the speedtest defaulted with News Media Express will yield uplink rather consistently at 20 Mbps. Channels 5 to 8 will typically achieve 25 Mbps downlink, hence downlink > uplink. Other channels above/below 5 to 8 will yield equal downlink performance or lower and also throughput performance penalty is much more sensitive to distance once out of the channels 5 to 8.
Test is performed on 20m bandwidth. I've noticed poorer performance on both 40m bandwidths. Router is the Dlink N5402SP. WPA2 AES. B/G/N.
Hmmm... Once on Mixed B/G/N mode, most router's performance drop tremendously.
Highly recommends either pure N mode or at the most mixed G/N mode.
And for your info, the speedtest app for iOS platform has limitation. It isn't designed for accurate testing of fast broadband like FTTH connection. It's designed for 3G and 3.5G mobile network. Notice the cap at 20Mbps on the speedtest app GUI?
liangtam, a bit off topic.
any gigabit router you recommend? my GR7000 is acting up.
btw i got the changed to the dlink whg as my hw lan port spoil.
dlink hg should be good enough ma.~
i dont want to have so much lan wire running to my switch area....
dlink hg --> gr7000 ---> multiple pc,
also can't bridge i think as i would lose the function of usb printer if that is the case.
don't understand.
why can't Dlink HG -> multiple PC?
too far ._. and i need to cover two area wifi also...
dlink can reach but real weak since its too far and screening issue therefore sometimes will drop...
and i got a total of 5 pc and 4 laptops... 3 are using lan only...
perhaps i am more fortunate.
i have >10 devices that needs wifi at home... and the dlink provides wifi at every corner superbly.
My problems still remain as worst! Dunno wat to do...
Is it to plug direct is the yellow cable to my laptop? But if plug yellow cable then totally cannt connect to Internet. So is it star hub issue? I tried with 2 laptop.
Now I speed test on wireless is only 30+MBPS in living room less than 1m from router. I signed up for fibre 100MBPS though...
DLink already guided me whole nite yesterday to try also...Very frustrating nw!
My problems still remain as worst! Dunno wat to do...
Is it to plug direct is the yellow cable to my laptop? But if plug yellow cable then totally cannt connect to Internet. So is it star hub issue? I tried with 2 laptop.
Now I speed test on wireless is only 30+MBPS in living room less than 1m from router. I signed up for fibre 100MBPS though...
DLink already guided me whole nite yesterday to try also...Very frustrating nw!
my worst issue is the usb printer ....
don't think dlink can configure... else i can just use my switch can liao.
haha... glad that i got myself a Wireless Printer...![]()
how about ask nicely here
a screen shot of your desktop with the network adapter task visible would be nicealso your ipconfig /all.
able to access 192.168.0.1??
and yellow is just a colour, can go outside buy longer one. cat5e is fine![]()
all 4 ports having same issue?
well if you dont understand can always ask friends
frustration and crying helps nothing, $53.50 would if you willing to pay SH on this simple setup but... don't later ask ppl get down there set up already dont pay :/ technician also need to eat one.
30MBPS is very good... infact not reachable i believe for your wifi equipment.
30Mbps+ is reachable and its common among most devices via wifi depending on deviceeven temperature can affect the performance.
up to 100Mbps is not the wifi bandwidth... is the bandwidth which SH provide for your HG to share around.
Tks a lot everyone! I did ask but they said it's star hub issue...Haizzz
Sorry I am really noob abt my IT. I will try to take a snapshot Also. Yellow cable is the one which star hub given to me. Yes, Dlink got guide me to change this n that channel.
Actually juz the signal kept dropping n cannt play game...It somehow disconnected automatically...
too far ._. and i need to cover two area wifi also...
dlink can reach but real weak since its too far and screening issue therefore sometimes will drop...
and i got a total of 5 pc and 4 laptops... 3 are using lan only...