TP-Link EB810v - Quick overview

[Henry Ng]

updated sadly no improvement in memory, still show 48-60% load. fug tplink wasting our 2GB internals using software locks

speedtest the qualcomm soc, very good.

mlo (5+6) still worse speedtest than single 6Ghz

Our router is 1Gb RAM only.

 

[limcc]

Why you need Wireguard?

I'm not trying to be rude but you really need to read what the others had posted, especially Xiaofan.

 

[Henry Ng]

I'm not trying to be rude but you really need to read what the others had posted, especially Xiaofan.

Honestly it will be hard for Starhub to allow Wireguard as this vpn thing is not say die die must have but i will try to push for you people to let SH allow it.

 

[mac34mac]

Hi, My 10Gbps ultra speed is facing some issue now, would like to know if anyone having this issue or experienced this before?
Ping to google DNS and some internet URL showing intermittent drops (10-15% drops).
Speed test from EB810v to StarHub server is getting very bad result (download speed of few Mbps to 100Mbps only). But speed test to other servers show good result (7-8Gbps).
Speed test from iPhone using Okla speed test app showing good result too (1.3Gbps on wifi 6E)
I have tested ping to internet GW of my EB810v and the result is good without dropping.
I have tried rebooting both EB810v and ONT too but still having same issue.

Anyone knows what could be the issue?

 

[kappak]

starhub got problem now even my office commercial line also affected....

 

[elmariachi]

starhub got problem now even my office commercial line also affected....

Same I was suffering whole night gaming and even my wife watching Netflix kept buffering. My usual ping from 93ms jumped to 320ms and alot of packet loss. Machiam shooting paper bullets. Pui! Called it a night hope Starhub gets their **** together.

 

[xiaofan]

The issues with Starhub may be over.

Some MR users may still face a bit of issue.

 

[den80001]

Hi everyone,

Since updating to the new firmware, my Youtube Revanced app is super laggy over Wifi ... have tried at my workplace wifi and can confirm it's only an issue with this TP link router.

Does anyone else have this issue?

Worst case, might need to rollback the firmware to the previous version? Does anyone know how I can do this?

TIA!

 

[JT2008]

Disabled ipv6 from the router. Might help.

 

[Henry Ng]

Hi, My 10Gbps ultra speed is facing some issue now, would like to know if anyone having this issue or experienced this before?
Ping to google DNS and some internet URL showing intermittent drops (10-15% drops).
Speed test from EB810v to StarHub server is getting very bad result (download speed of few Mbps to 100Mbps only). But speed test to other servers show good result (7-8Gbps).
Speed test from iPhone using Okla speed test app showing good result too (1.3Gbps on wifi 6E)
I have tested ping to internet GW of my EB810v and the result is good without dropping.
I have tried rebooting both EB810v and ONT too but still having same issue.

Anyone knows what could be the issue?

No problem at all. Last night i did it.

Ping statistics for 2404:6800:4003:c11::5e:
Packets: Sent = 150, Received = 150, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 2ms, Maximum = 3ms, Average = 2ms


Speedtest by Ookla

Server: MyRepublic Singapore - Singapore (id: 5935)
ISP: StarHub
Idle Latency: 2.88 ms (jitter: 0.13ms, low: 2.63ms, high: 2.99ms)
Download: 8203.40 Mbps (data used: 8.0 GB)
2.75 ms (jitter: 0.62ms, low: 1.97ms, high: 11.72ms)
Upload: 6321.85 Mbps (data used: 4.7 GB)
2.15 ms (jitter: 0.61ms, low: 1.65ms, high: 10.04ms)
Packet Loss: 0.0%

Speedtest by Ookla

Server: i3D.net - Hong Kong (id: 22126)
ISP: StarHub
Idle Latency: 38.62 ms (jitter: 0.29ms, low: 38.13ms, high: 39.28ms)
Download: 5078.59 Mbps (data used: 9.0 GB)
37.86 ms (jitter: 2.16ms, low: 37.15ms, high: 163.87ms)
Upload: 599.31 Mbps (data used: 952.7 MB)
37.64 ms (jitter: 0.41ms, low: 37.24ms, high: 43.43ms)
Packet Loss: 0.0%

 

[Henry Ng]

Speedtest by Ookla

Server: GSL Networks - Los Angeles, CA (id: 50081)
ISP: StarHub
Idle Latency: 165.53 ms (jitter: 0.28ms, low: 164.81ms, high: 165.93ms)
Download: 4859.40 Mbps (data used: 6.7 GB)
165.80 ms (jitter: 3.44ms, low: 165.25ms, high: 512.33ms)
Upload: 179.37 Mbps (data used: 327.7 MB)
164.71 ms (jitter: 2.25ms, low: 164.26ms, high: 390.90ms)
Packet Loss: 0.0%

 

[Henry Ng]

Server: CTCSCI TECH LTD - Tokyo (id: 62217)
ISP: StarHub
Idle Latency: 77.80 ms (jitter: 0.16ms, low: 77.71ms, high: 77.95ms)
Download: 4473.61 Mbps (data used: 6.5 GB)
105.48 ms (jitter: 24.86ms, low: 80.77ms, high: 309.71ms)
Upload: 395.27 Mbps (data used: 470.2 MB)
85.74 ms (jitter: 0.99ms, low: 85.06ms, high: 102.48ms)
Packet Loss: 0.0%

 

[den80001]

Wow yes that solved it, thank you!

Can I ask why TP link can't handle ipv6 ? As this is the first time I'm using this brand

 

[o.o123]

Hi guys im a newbie here, after setup i realise there is actually 3 wifi channels, 2.4g, 6g and MLO.

it necessary to have all 3? or just use MLO is good enough?

 

[trenzterra]

Wow yes that solved it, thank you!

Can I ask why TP link can't handle ipv6 ? As this is the first time I'm using this brand

Something wrong with StarHub lately. Think their DNS servers for IPv6 not working

 

[Henry Ng]

Something wrong with StarHub lately. Think their DNS servers for IPv6 not working

What happened? I ping to USA and it look ok to me.

Ping statistics for 2001:4998:44:3507::8000:
Packets: Sent = 60, Received = 60, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 187ms, Maximum = 199ms, Average = 187ms

 

[Henry Ng]

I ping google.com.sg and it is ok too.


Ping statistics for 2404:6800:4003:c1a::5e:
Packets: Sent = 60, Received = 60, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 2ms, Maximum = 3ms, Average = 2ms

 

[MArVeLIciOUS888]

Hi Guys,

I am having broadband service issues this week and I would like to know if others are also experiencing the same problems.

My 10gb plan was not active from 8pm Mon 30-Sep till about 1am Tue 1-Oct. I called 1633 and did everything they told me (off ONT, unplug / replug fibre cable, on ONT) and they said need to arrange for technician to come to my house to take a look.

Next morning 6am Tue 1-Oct, service was active and it was OK till late night. I proceeded to cancel the appointment.

At 3pm Wed 2-Oct, my wife called me to say service was not active again. There is no service till now 4pm Thu 3-Oct. Spoke to Starhub's tech support while I'm not home and they can't really help. And I have done those steps multiple times but service is still not active.

I told Starhub that when the problem happened, I also checked DownDetector and saw that there were many reports of internet failures (peak at 700+ on Monday). But it seems like Starhub doesn't recognise DownDetector reports.

1. Has anyone been having problems too? I'm in a HDB estate at Sin Ming Avenue, if this info is of help. This increase in report surely mean that there is a problem with Starhub's end, either their infra, cables etc.

2. I also suspect that the ONT might be faulty. Normally, there will be 4 green lights on the ONT (power, link, auth, LAN1). There was a period where only the first and last (power, LAN1) was lit. Now there is only a solid orange light for power. Is this an indication that the ONT is not working properly? I spoke to 3 different tech support guys and they could not explain what the single solid orange light means. One guy said that there was no incoming signal (duh) and another said need to test with a new ONT.

Anyone had similar problems before?

 

[Henry Ng]

Hi Guys,

I am having broadband service issues this week and I would like to know if others are also experiencing the same problems.

My 10gb plan was not active from 8pm Mon 30-Sep till about 1am Tue 1-Oct. I called 1633 and did everything they told me (off ONT, unplug / replug fibre cable, on ONT) and they said need to arrange for technician to come to my house to take a look.

Next morning 6am Tue 1-Oct, service was active and it was OK till late night. I proceeded to cancel the appointment.

At 3pm Wed 2-Oct, my wife called me to say service was not active again. There is no service till now 4pm Thu 3-Oct. Spoke to Starhub's tech support while I'm not home and they can't really help. And I have done those steps multiple times but service is still not active.

I told Starhub that when the problem happened, I also checked DownDetector and saw that there were many reports of internet failures (peak at 700+ on Monday). But it seems like Starhub doesn't recognise DownDetector reports.

1. Has anyone been having problems too? I'm in a HDB estate at Sin Ming Avenue, if this info is of help. This increase in report surely mean that there is a problem with Starhub's end, either their infra, cables etc.

2. I also suspect that the ONT might be faulty. Normally, there will be 4 green lights on the ONT (power, link, auth, LAN1). There was a period where only the first and last (power, LAN1) was lit. Now there is only a solid orange light for power. Is this an indication that the ONT is not working properly? I spoke to 3 different tech support guys and they could not explain what the single solid orange light means. One guy said that there was no incoming signal (duh) and another said need to test with a new ONT.

Anyone had similar problems before?

Just need to report this case and let the tech come in to check. Can also request SH to change the ONT. No issue at all. The tech also have a device to check the FTP.

 

[Henry Ng]

Wow yes that solved it, thank you!

Can I ask why TP link can't handle ipv6 ? As this is the first time I'm using this brand

No problem with IPv6 on TP-Link router. Ping to yahoo.com is ok. Better report to SH.

Ping statistics for 2001:4998:44:3507::8000:
Packets: Sent = 120, Received = 120, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 188ms, Maximum = 190ms, Average = 188ms