Wireless IP Camera thread

[Hardcor?]

I am using the same IP Cam viewer pro version too. It is possible to activate both talk and listening at the same time.

With i-phone, it's true. Not sure about androide, downloaded the paid apps and it crashed yesterday.

 

[Hardcor?]

Yes, 11g at 54MBits/s is fast enough for VGA resolution. F3 comes witha built in speaker and the adjustments seems just right so you don't have really loud echo. Just one time echo and then it dies off. Actually, it is a form of feed back that allows you to get confirmation of audio output if you want to put it another way. F3 comes with built in speaker and mic thanks.

The one way audio on the H3-187V and H-137V is difficult on the user as it does not switch automatically with the Android and ios.

I'm talking about the free apps the comes from the manufacturer and not the 3rd party apps such as the one from Robert Chou.

 

[Dr_ARCHer]

Dr_Archer, setup a wireless G AP loh.

There are over 20 visible routers/APs operating in the 2.4 GHz band. Wireless G just can't make it. If only there are wireless IP cameras on the 5Ghz band.....

 

[Fuzzywuz]

Can I use Robert Chou's software with VSTARCAM'S H6837WIP? Not sure how I can set this up.

 

[Fuzzywuz]

There are over 20 visible routers/APs operating in the 2.4 GHz band. Wireless G just can't make it. If only there are wireless IP cameras on the 5Ghz band.....

It's good to have N on the router because of multiple connections with phones, PCs and IP cameras. But I've been using a G access point in my office with many users sharing the 2.4GHz band and works fine. It depends on the proximity of the device to the router.

 

[Fuzzywuz]

Dr_Archer, setup a wireless G AP loh.

Actually IEEE 802.11b, g and n are backwards compatible. No need to setup wireless G AP if you already have N AP.

 

[geckoSG]

Actually IEEE 802.11b, g and n are backwards compatible. No need to setup wireless G AP if you already have N AP.

Yes, all N routers does support b/g/n mixed modes. But not optimizing if we want a pure N network wif a G device somewhere in the house

In my case, my printer is the only device at home wif G, so, I had an additional USB Powered AP to cater for that. My entire infrastructure is on pure N. Gaming at 5GHz for the kids n 2.4GHz for old man like me.

Now waiting for my next home to be built, have wired up all the rooms with wires instead as the number of SSID ard my new neighbourhood is crazy.

 

[Dr_ARCHer]

Can I use Robert Chou's software with VSTARCAM'S H6837WIP? Not sure how I can set this up.

Robert Chou's IP Can Viewer supports VSarCam H6837WI directly. In fact, there are two models to choose from: H6837WI and H6837WI(2). This s for the Android version. Need to go home and look at my iPad to check if the iOS has the same support. Robert typically releases the Android version first before the iOS version.

 

[Dr_ARCHer]

I am using the same IP Cam viewer pro version too. It is possible to activate both talk and listening at the same time.

For the android version, each time I activate the Talk button, the sound from the camera end disappear. When I am overseas, I either use it like a walkie talkie, or I use another device (my tablet) to just listen while I Talk with the phone. Saves me a bit on international calls because hotel internet is typically free O

 

[Dr_ARCHer]

It's good to have N on the router because of multiple connections with phones, PCs and IP cameras. But I've been using a G access point in my office with many users sharing the 2.4GHz band and works fine. It depends on the proximity of the device to the router.

Are the users sharing the same wireless G access point or the same 2.4 band? Unlike wireless N, wireless G seems to be more affected by congestion. Anyway, I believe in being a good neighbour and try not to 'pollute' the airwaves. For example, I have two ISPs, each with an Asus AC router. I configure one to 2.4 only and the other to 5.0 only.

 

[Fuzzywuz]

Sharing 2.4GHz band. Still using an old D-Link AP so no N. But it works fine for me.

 

[Spongy]

For the android version, each time I activate the Talk button, the sound from the camera end disappear. When I am overseas, I either use it like a walkie talkie, or I use another device (my tablet) to just listen while I Talk with the phone. Saves me a bit on international calls because hotel internet is typically free O

I am using the pro version on both Note 2 and Note 3 and both works fine, i.e. can activate both talk and listen function at the same time.

 

[Dr_ARCHer]

I am using the pro version on both Note 2 and Note 3 and both works fine, i.e. can activate both talk and listen function at the same time.

I see now. There is a Enable full duplex audio option under the More Options settings for each camera. I kept looking for this under the global settings, which is why I can't find it. Thanks for letting me know of the full duplex option.

 

[Spongy]

I see now. There is a Enable full duplex audio option under the More Options settings for each camera. I kept looking for this under the global settings, which is why I can't find it. Thanks for letting me know of the full duplex option.

You are welcome, glad to share info.

 

[geckoSG]

Robert Chou's IP Can Viewer supports VSarCam H6837WI directly. In fact, there are two models to choose from: H6837WI and H6837WI(2). This s for the Android version. Need to go home and look at my iPad to check if the iOS has the same support. Robert typically releases the Android version first before the iOS version.

Shld b H6837WI (2), but audio features doesn't work at all

 

[johnboatcat]

Question for T7833WIP owners.

Is the 90 degree bracket removable so the T7833WIP could be mounted from the ceiling like in the middle of a garage or carport? Thanks!

 

[geckoSG]

Is the 90 degree bracket removable so the T7833WIP could be mounted from the ceiling like in the middle of a garage or carport? Thanks!

Nope. Checked mine. Cannot remove. U need another model perhaps

 

[johnboatcat]

What are all those black dots near the seams above the camera bell? Are they hex screws to take it apart or adjust the angle? It has to come apart someway.

 

[mikecjw]

Anyone facing problem when connecting ur ip camera outside via WIPCxxxx.nsvr.com?

All along is fine, until yesterday, i am unable to connect. Tried many ways.
1) At home, using LAN / Wifi, no problem.
2) Outside, cannot connect via WIPCxxxx.nsvr.com but can connect using ip address given by WIPCxxxx.nsvr.com with port 8081.

Any advise? Thanks
Is the WIPCxxxx.nsvr.com down? Using WIPC401 from Aztech.

 

[cptow1]

Any bought Sineoji PT331V ?
I test the response very fast almost no lag.