Aztech DSL7002GRV-(s)

[||||||||||]

Impossible to do so... lol...

argh.... sucks man.... guess i'll have to wait till contract over.

 

[VanSaim]

anyone tried calling singtel to disable vlan on their side?

i'm not using telephone and mio tv.

can i do that so i can get a TP link Archer C7 to replace the crappy 7002.

Since you're not using Digital Phone and MioTV, I don't see why you cannot use other brand Router.


You don't need to disable them if you don't want to. You still can use another non-SingTel Router. However, it is possible to disable them in the Aztech Router by removing the configuration.


You can actually email to SingTel. I had done it for my Digital Phone line.

 

[rochmateli]

A good and fast dns server?

 

[Kvicez]

Hi,

I would like to set up QoS to limit the bandwidth of 1 single device. Can any kind soul advise how do I go about doing that on the DSL7002GRV?

Thanks!

 

[taytehni]

does anyone know how to remove DHCP Server assigned devices?

 

[renfred89]

does anyone know how to remove DHCP Server assigned devices?

meaning? you wanna disable DHCP on 7002?

 

[renfred89]

Hi,

I would like to set up QoS to limit the bandwidth of 1 single device. Can any kind soul advise how do I go about doing that on the DSL7002GRV?

Thanks!

QoS does not limit the bandwidth of 1 device only. that is known as a bandwidth limiter which is not available on 7002.

 

[Kvicez]

QoS does not limit the bandwidth of 1 device only. that is known as a bandwidth limiter which is not available on 7002.

Thanks renfred!

 

[kuryakin]

Hi,

I would like to set up QoS to limit the bandwidth of 1 single device. Can any kind soul advise how do I go about doing that on the DSL7002GRV?

Thanks!

What is the admin password for DSL7002GRV?

 

[renfred89]

What is the admin password for DSL7002GRV?

Password: H3ll0t3ch

 

[kuryakin]

Password: H3ll0t3ch

Thanks! This helps...

 

[Matrix21]

anyone knows how to set this modem to Direct IP mode? Is it using Bridging? I tried connecting it to my switch using bridge mode but cant seem to get IP address from the switch

 

[renfred89]

anyone knows how to set this modem to Direct IP mode? Is it using Bridging? I tried connecting it to my switch using bridge mode but cant seem to get IP address from the switch

what is direct ip? you mean static IP is it?

what switch is that? managed or unmanaged?

 

[Matrix21]

what is direct ip? you mean static IP is it?

what switch is that? managed or unmanaged?

i am thinking of using this aztech router to act as a dumb switch, when i set the router to bridge mode, there was no ip issued to the router
cisco switch unmanaged

 

[renfred89]

i am thinking of using this aztech router to act as a dumb switch, when i set the router to bridge mode, there was no ip issued to the router
cisco switch unmanaged

i don't know how you set the router to bridge mode, but i think if you want the router to act as dumb switch, turn off the wireless feature first.

after which, turn off the DHCP server and do a reboot. after rebooting, connect one of the LAN ports to the switch then it should work right..

 

[lasnoblur]

Hello, im running on only 30mbps on a 500mb plan from singtel.

i have adjusted both 2.4g and 5g to bandwidth 20/40 (used to be only 15) at router advanced settings.

Is there anything else i can do?

 

[RyuShinEX]

does this router perform well with 1Gbps plan?

 

[renfred89]

does this router perform well with 1Gbps plan?

If you have recently upgraded to 1gbps, th3n you will be given the new 7009 lor..

 

[RyuShinEX]

If you have recently upgraded to 1gbps, th3n you will be given the new 7009 lor..

thank you!

 

[viberzdae]

recently updated to android 6.0.1 and both unable to connect to my wifi at home.

called singtel asnd they told me is aztech problem...

anyone got any solution?