DNS-323 Network Storage
- Thread starter shadowandy
- Start date
no problem with 1.04. in fact it's better to format your drives using 1.04 so that u can use unicode filenames (and no need to set your winxp to chinese)
Hi! I just bought the DNS323 with 2x250GB Seagate HDD, connect it to my Speedtouch 585 router and my desktop pc. I insert the CD but it cannot seem to find the drive? This thread is too long and was wondering anyone can pinpoint me to where to configure and install things like BT/Print Server? Thanks in advance.
1. You can use the bundled application to find your NAS
2. Or go to your router web administration interface to find out what IP has been assigned to your NAS
3. Or do a network or broadcast ping to determine what IP has been assigned to your NAS.
4. Or engage our services for on-site support. My ex-company used to charge $2000/man-day though
1. You can use the bundled application to find your NAS
2. Or go to your router web administration interface to find out what IP has been assigned to your NAS
3. Or do a network or broadcast ping to determine what IP has been assigned to your NAS.
4. Or engage our services for on-site support. My ex-company used to charge $2000/man-day though
$2000/man-day charge is not uncommon. must be big IT firm/servicing company? alas, not as many people are into IT profession as before. its difficult and costly to train people, equipments are too expensive and too many stuffs to know and the knowledge you invested in become obsolete very fast. its a lot easier just being a PC repairman, but even this kind of job is no better prospect.
Mystrix
Senior Member
- Joined
- Sep 29, 2000
- Messages
- 767
- Reaction score
- 0
Bought the DNS323 quite some time ago. Recently upgrade my setup to 500GB x 2 (Seagate) from my 320GBx2 setup. Also upgrade the firmware to latest 1.04.
Firmware upgrade fixed the issue of unicode files, but brought the following problems not encountered previously;
1. Unable to connect back to network shares after reboot of NAS. Need to go to web console and click on some settings before the shares reappear on the network again.
2. As my Setup is RAID 1. 500GB x 2 ... My left or right drive becomes degraded when i shutdown the NAS using the web console or push button. After rebuilt of the degraded drive(take out kill the paritions and re-insert), the units runs fine until the next shutdown.
Anyone encounter the same problem(s)?
Firmware upgrade fixed the issue of unicode files, but brought the following problems not encountered previously;
1. Unable to connect back to network shares after reboot of NAS. Need to go to web console and click on some settings before the shares reappear on the network again.
2. As my Setup is RAID 1. 500GB x 2 ... My left or right drive becomes degraded when i shutdown the NAS using the web console or push button. After rebuilt of the degraded drive(take out kill the paritions and re-insert), the units runs fine until the next shutdown.
Anyone encounter the same problem(s)?
Hi! Manage to fix my NAS storage. I think my desktop is too old. I am using a AMD XP1700 with 1GB DDR ram. But when I use my laptop, no problem using the included disk. Upgraded to firmware 1.04 also. Now I have a few more things to ask:-
(1) How to set up the bittorrent? I read the ML Donkey/Funplug but still not getting it. I have save the file as mention by ShadowAndy but when i point my webpage, I get nothing.
(2) I also have a MacMini which I would like to be able to access my DNS 323. How to network a Mac OS X with theDNS323?
(1) How to set up the bittorrent? I read the ML Donkey/Funplug but still not getting it. I have save the file as mention by ShadowAndy but when i point my webpage, I get nothing.
(2) I also have a MacMini which I would like to be able to access my DNS 323. How to network a Mac OS X with theDNS323?
Hi! I am still lost. I upgraded my firmware to 1.04. I got a page that have schedule download. How do I start my NAS to start doing some bit torrent? I try to save my torrent in my Network drive but when I point my webpage to open nothing happen also.
I d/l also Sancho but again totally lost as. I don't know what setting it is asking. I think I have enable telnet & have ML donkey but not sure what next. Thanks in advance for any help.
I d/l also Sancho but again totally lost as. I don't know what setting it is asking. I think I have enable telnet & have ML donkey but not sure what next. Thanks in advance for any help.
richneo
Arch-Supremacy Member
- Joined
- Jan 1, 2000
- Messages
- 17,467
- Reaction score
- 10
I am still lost. Which post should I refer to? I try the telnet instruction (actually I don't know what it is but I run cmd and all I get is permission denied. Appreciate if you could breakit down further. Sorry and thanks in advance.
richneo
Arch-Supremacy Member
- Joined
- Jan 1, 2000
- Messages
- 17,467
- Reaction score
- 10
have to wait for andy to finish his exams first..I have to thank shadowandy man!
Wow finally got my bitorrent working with transmission.
Thanks to the instruction giving on his blog PHEW!
Hurray!
Its so cool...
Wonder if there are any more cool stuff hehe
he trying to compile transmission 1.11 after his sexams
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts.
Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
