LG's 2012 TV lineup

[petetherock]

Light bleed is common in LED / LCD TVs. Don't want that? Switch to a plasma.

 

[JDelphiNet]

Hi,

how do you solve this isssue.

mine is better than yours, only very minimal light at the top corner. not sure if this is normal..i read some review saying that All led tv at the moment got bleed. All brands encounter this due to edge bleeding.

On my LM6700 there's a wizard that guides you through adjusting brightness etc.

LG LM6700 Series Calibrations and Picture Settings

Not sure if the above will be of help to you guys.

 

[Sangha]

Hi,

how do you solve this isssue.

mine is better than yours, only very minimal light at the top corner. not sure if this is normal..i read some review saying that All led tv at the moment got bleed. All brands encounter this due to edge bleeding.

call LG and check if they can repair it??

update us

 

[mozaat]

Btw did anyone manage to do any kind of video streaming from those china website eg pptv, pps etc? Lg smart tv can support? Is their smart system based on android?

 

[hbyik01]

Btw did anyone manage to do any kind of video streaming from those china website eg pptv, pps etc? Lg smart tv can support? Is their smart system based on android?

My LM7600 can view movies at PPS webpage but the quality is

 

[bojangle]

my LM6700 cannot power on last night, the red LED light keep blinking but nothing happen on the screen or sound. wonder could it be the firmware, cos after last update, some time need to press remote 2 or 3 times in order to turn on.

 

[||||||||||]

yo guys, don't be scared by the warranty labor charges on their warranty card and website.

i went to their service center and asked already.

no charges during the 3 yr warranty period.

 

[mozaat]

Me again the newly bought lm6450 55'inch. Wife aggroed, because now local channels looks abit blur, like watching pirated CD @$&"...
My tv is connected to starhub box via hdmi. I had tried to set the tv display 4:3, but no improvement. Am I correct to diagnose that video source is not in HD, thus when trying to play it in big screen, the blurrinest becomes more obvious? My precious 42 inch when showing local channels via starhub , quality wise still very much acceptable .
So ... Need advise..... Any settings or tweaks I can do to improve the quality of the local channel when playing on a big 55 inch panel?
Thx in advance

Moz

 

[obsession]

Hi,

how do you solve this isssue.

mine is better than yours, only very minimal light at the top corner. not sure if this is normal..i read some review saying that All led tv at the moment got bleed. All brands encounter this due to edge bleeding.

Still acceptable. Only noticeable when watch in dark which I rarely do.
Like what the rest of the bros said, it's inevitable on led edge lit backlight system.
I noticed if I press on the edge(cuz not hard glass on bezel, like a suspended glass), there is minimal leakage. Dunno if it due to assembly quality issue.
Will call lg when free.

Dunno how to adjust the ghosting effect. Tried changing "trumotion" settings, not much diff leh.

 

[tigerwoods]

Is there only one audio out which is the digital out for lg 6410? I can't find any other option for audio out connection.

 

[||||||||||]

Me again the newly bought lm6450 55'inch. Wife aggroed, because now local channels looks abit blur, like watching pirated CD @$&"...
My tv is connected to starhub box via hdmi. I had tried to set the tv display 4:3, but no improvement. Am I correct to diagnose that video source is not in HD, thus when trying to play it in big screen, the blurrinest becomes more obvious? My precious 42 inch when showing local channels via starhub , quality wise still very much acceptable .
So ... Need advise..... Any settings or tweaks I can do to improve the quality of the local channel when playing on a big 55 inch panel?
Thx in advance

Moz

nothing much you can do, same pixel count but it's spread out to 55" instead of 42" panel.

suck thumb lor.

 

[unity58]

On my LM6700 there's a wizard that guides you through adjusting brightness etc.

LG LM6700 Series Calibrations and Picture Settings

Not sure if the above will be of help to you guys.

can anyone tell me how do we set these calibration thing? cause seem like when I set on tv mode, the settings will be different if on blu ray mode. anyone can advise me? the above settings is for normal tv?

 

[kun1he2]

My tv is connected to starhub box via hdmi. I had tried to set the tv display 4:3, but no improvement. Am I correct to diagnose that video source is not in HD, thus when trying to play it in big screen, the blurrinest becomes more obvious?

Is your starhub box configured to output 1080i? Try pressing info button on the lg remote, does it say 1080i?

Also, make sure to set ur TV to "Just Scan".

 

[mizarahi]

Anybody kind enough to share what useful apps that you have installed in your LG tv?

 

[mozaat]

Omg savior!! Will try later hik hik

 

[williamfrancis]

Is there only one audio out which is the digital out for lg 6410? I can't find any other option for audio out connection.

that seems to be the case. what device do you intend to connect the audio to? I connect it to a pioneer AV receiver and I get 5.1 digital audio on some of the HD channels, some are stereo. the digital audio output is well sync with the TV speaker so you don't need to mute the speaker.

If I connect the starhub digital audio output the AV receiver, it is not (lip) sync.

Hope this help!

 

[unity58]

can anyone tell me how do we set these calibration thing? cause seem like when I set on tv mode, the settings will be different if on blu ray mode. anyone can advise me? the above settings is for normal tv?

any advise?

 

[mizarahi]

any advise?

Under setting, go Picture, then scroll all the way down to Picture Wizard 2.

 

[JDelphiNet]

There's a spider on my LG LCD TV

The LG technician was adamant that it was due to physical contact. Wasn't given the benefit of the doubt. Tsk.

Owners of LM6700 and perhaps other models too, better be extra careful with the front element (glass?) of the TV. When I hit it with the PS3 controller earlier, I'd reckon even the technician was surprised that it didn't take much force to "crack" the insides of the TV.

 

[Sangha]

i think i saw some light exposure on my top right hand side of my LM6410 also.

And i can't seem to find the control for 3D depthness as well, can anyone tell me where is it?

The most i can do is only convert 2D to 3D and its not even entirely converted, meaning i take off the 3D glass i can view it clearly too with my naked eyes!

And the FTA channels is really lousy in pic quality. sighz...

anyone pro can help?