[Official] Home Automation Thread

bullfrog

Banned
Joined
Jan 1, 2000
Messages
18,188
Reaction score
1,152
from the link

A physical Hue Bridge is required for Philips Hue lights to function - this virtual bridge will not replace a physical bridge. Instead, it allows Home Assistant to represent non-Philips Hue devices to Amazon Echo as Philips Hue devices, which Amazon Echo can control with built-in support.

>> so for actual Philips Hue users, they need the physical bridge. For non users, can use emulator. am i understanding this correctly?

Correct. Cos Philips bulbs uses a propriety way to communicate with its Bridge. Don't think even smarthings can communicate directly but also needs the hue bridge to see the bulbs.

The hue emulation is for alexa to talk to hassio directly without going over the cloud and using its skill.

Philips bulb users would connect their hue bridge to hassio so that they have one unified interface.
 
Last edited:

bullfrog

Banned
Joined
Jan 1, 2000
Messages
18,188
Reaction score
1,152
Hi, am I reading correctly that the aqara switch can support up to 800W hence it should support 5 sets of the 12W Philips LED?


ChaST8E.jpg


LSwWuIV.jpg

Pm for StackSocial referral link - to earn credits for online courses! HardwareZone Forums app

i think with the non-neutral switch spoiling on a majority of its users, you might not get a confirmation to your question even if you did read it right :(
 

bullfrog

Banned
Joined
Jan 1, 2000
Messages
18,188
Reaction score
1,152
BTW I think I have a 5 year old laptop lying around , 8gb , quad core and ssd. Should I use this instead of the raspberry for HA? Would electricity be higher than rasp or negligible?
Posted with my chat bot HardwareZone Forums app

You can try with the old laptop to see if everything works first la. But very likely u will start having itchy fingers and buy a pi cos its smaller and can hide anywhere. A pi just makes the place neater. IMO, just get a pi so u no need to setup again on alexa.

I initially setup up HA on my desktop first before getting a pi. Copying the configuration files across is easy enough. However, i had to login to alexa and remove every device that was detected on my desktop as i had double entries after i setup my pi.
 
Joined
May 11, 2017
Messages
62,282
Reaction score
11,756
You can try with the old laptop to see if everything works first la. But very likely u will start having itchy fingers and buy a pi cos its smaller and can hide anywhere. A pi just makes the place neater. IMO, just get a pi so u no need to setup again on alexa.

I initially setup up HA on my desktop first before getting a pi. Copying the configuration files across is easy enough. However, i had to login to alexa and remove every device that was detected on my desktop as i had double entries after i setup my pi.

ok thanks..

apart from the z-stick
I'm just toying with the idea if i should get a zigbee and zwave combo device? if there's zigbee, i can hoot cheap xiaomi stuff :s13:
 

bluez

Junior Member
Joined
Nov 22, 2004
Messages
40
Reaction score
0
anyone have this situation before? my home gateway went offline in mi home app after internet problems a few days ago but never came back online. i manually powered off and on the gateway and the automation rules are working again but the device is stuck offline in mi home app.

Wondering if yours is working fine now? My gateway will go offline every few days and I will need to reconnect it back to the app by searching for the device.

Heng all the setups are still there every time but very irritating especially if I'm out and couldn't connect manually.
 

bullfrog

Banned
Joined
Jan 1, 2000
Messages
18,188
Reaction score
1,152
Wondering if yours is working fine now? My gateway will go offline every few days and I will need to reconnect it back to the app by searching for the device.

Heng all the setups are still there every time but very irritating especially if I'm out and couldn't connect manually.

Is your gateway beside ur router? I have mine beside it. No disconnection problems.
 

SaLvAtoOo

Supremacy Member
Joined
Sep 2, 2000
Messages
5,815
Reaction score
17
ok thanks..

apart from the z-stick
I'm just toying with the idea if i should get a zigbee and zwave combo device? if there's zigbee, i can hoot cheap xiaomi stuff :s13:

HA also can run on docker... if u happen to have synology nas, you can run it in docker.
 

Gainduia

Member
Joined
Jan 2, 2012
Messages
253
Reaction score
12
Those who have xiaomi gateway, what is the range?
As I am afraid it will not reach the MBR aqara switch when gateway placed near the entrance door.
Saw online, ZigBee range is around 10m to 20m.
 

pajamasguy

Junior Member
Joined
Sep 28, 2007
Messages
83
Reaction score
0
Those who have xiaomi gateway, what is the range?
As I am afraid it will not reach the MBR aqara switch when gateway placed near the entrance door.
Saw online, ZigBee range is around 10m to 20m.

my gateway is right at my entrance too but its not the distance that causes any range problem but how many doors and concrete walls it has to pass thru. I have a doorbell switch that goes offline even when its not more than 3m away. If there is a problem with range, just use a repeater for the zigbee signal
 

bullfrog

Banned
Joined
Jan 1, 2000
Messages
18,188
Reaction score
1,152
Those who have xiaomi gateway, what is the range?
As I am afraid it will not reach the MBR aqara switch when gateway placed near the entrance door.
Saw online, ZigBee range is around 10m to 20m.

My Gateway is in my master bedroom and the furthest light switch is in near my main door. No problems with their connection. There shouldn't be any, provided you have other zigbee devices along the way since they will repeat the signals. My entire house uses xiaomi light switches. Hence i have repeaters everywhere. In my 4 months of living here i did not face any connectivity issues.
:)
 
Last edited:

Gainduia

Member
Joined
Jan 2, 2012
Messages
253
Reaction score
12
My Gateway is in my master bedroom and the furthest light switch is in near my main door. No problems with their connection. There shouldn't be any, provided you have other zigbee devices along the way since they will repeat the signals. My entire house uses xiaomi light switches. Hence i have repeaters everywhere. In my 4 months of living here did i face any connectivity issues. :)

So the Xiaomi Aqara switches can act as repeater as well?
Then shouldn't be any issue.
 

pajamasguy

Junior Member
Joined
Sep 28, 2007
Messages
83
Reaction score
0
So the Xiaomi Aqara switches can act as repeater as well?
Then shouldn't be any issue.

that depends on which wall switch you are using. the non-neutral type cannot act as repeaters, only the neutral ones can be repeaters or any AC powered zigbee devices like the smart plugs or the wall sockets
 

Gainduia

Member
Joined
Jan 2, 2012
Messages
253
Reaction score
12
that depends on which wall switch you are using. the non-neutral type cannot act as repeaters, only the neutral ones can be repeaters or any AC powered zigbee devices like the smart plugs or the wall sockets

Yea, planning to get the neutral type Aqara wall switches, to control the lighting in the house.
 
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top