[Official] Home Automation Thread

viix

Master Member
Joined
Nov 17, 2001
Messages
3,236
Reaction score
2
Regarding smart lights, we must not just consider dimming, but also the ability to change color temperature and color too. That's where the value comes in. I usually set the temperature base on time of day. From the golden hour to full daylight in the morning to noon, dropping to 4000k near 5pm and 2800k just before bedtime.

For night time, I actually use a deep red orange scene throughout my house to not disturb my night vision. It also helps not to wake my baby when I do nappy change with it.
With chinese yeelight, zemismart and gledopto hue compatible downlights and controllers + milight that I combine with a hub, it actually is quite cost effective and not as expensive.

Not forgetting you can already get high CRI options from ledstrips and the yeelight ceiling lights.
 
Last edited:

sellwatch

Senior Member
Joined
Aug 24, 2010
Messages
642
Reaction score
7
anybody has issue linking tuya smart plugs with google home? I tried to link my account but it says "google action service are temporarily unavailable in the area where the account you have attempted to log in to is located".

I tried to change my google into USA account but still didnt work.
 

Vulpix

Moderator
Moderator
Joined
Jan 1, 2000
Messages
105,337
Reaction score
3,864
anybody has issue linking tuya smart plugs with google home? I tried to link my account but it says "google action service are temporarily unavailable in the area where the account you have attempted to log in to is located".

I tried to change my google into USA account but still didnt work.
Did you check your account? Is it +65 when you register? My Tuya smart plugs were working fine with Google Home, didn't do anything special.
 

sellwatch

Senior Member
Joined
Aug 24, 2010
Messages
642
Reaction score
7
Did you check your account? Is it +65 when you register? My Tuya smart plugs were working fine with Google Home, didn't do anything special.

i registered via email.. if i'm not wrong can register via mobile number +65. Is your log in via mobile number and not email?
 

Vulpix

Moderator
Moderator
Joined
Jan 1, 2000
Messages
105,337
Reaction score
3,864
i registered via email.. if i'm not wrong can register via mobile number +65. Is your log in via mobile number and not email?
Ooops, I just checked. Mine is login via email. Seems like no issue.
 

waterfoe

Junior Member
Joined
Jan 21, 2002
Messages
71
Reaction score
0
The choice will be determine by your priority:

1. Design - The bulb that is able to blend in easily will be the GU10 bulb from Hue or LIFX
2. Function - Like what you mentioned, to have all the color, temperature, this can only be done by the smart bulb
3. Brightness - Conventional lighting tend to has more choices
4. Cost - Convention lighting + Lighting module vs Convention lighting + smart bulb

It really depend what is the actual requirements and not forgetting the size of the house will affect the overall solution too...

Regarding smart lights, we must not just consider dimming, but also the ability to change color temperature and color too. That's where the value comes in. I usually set the temperature base on time of day. From the golden hour to full daylight in the morning to noon, dropping to 4000k near 5pm and 2800k just before bedtime.

For night time, I actually use a deep red orange scene throughout my house to not disturb my night vision. It also helps not to wake my baby when I do nappy change with it.
With chinese yeelight, zemismart and gledopto hue compatible downlights and controllers + milight that I combine with a hub, it actually is quite cost effective and not as expensive.

Not forgetting you can already get high CRI options from ledstrips and the yeelight ceiling lights.
 

plustwo

Arch-Supremacy Member
Joined
Dec 28, 2009
Messages
12,689
Reaction score
580
why nobody like yeelight? one color bulb $18 using shopee voucher, no need bridge also
 

Epi_curean

Member
Joined
Feb 25, 2001
Messages
246
Reaction score
0
In this configuration, no current flows to the Shelly when physical switch is switched OFF and hence Shelly doesn't work. You need to hard-wire the physical switch to be always ON if you want the relay to work all the time and hence control the lighting through other means.

So there is no device, or configuration , short of making the physical switch in a perpetual "ON" position, to enable both the physical and "smart" control aspects capable?
 

zoneguard

Senior Member
Joined
Jun 2, 2000
Messages
1,957
Reaction score
398
So there is no device, or configuration , short of making the physical switch in a perpetual "ON" position, to enable both the physical and "smart" control aspects capable?

It depends on whether you have ceiling pendant of this configuration:
68747470733a2f2f692e696d6775722e636f6d2f3678614c4744472e706e67
taken from this link.

If you are able to supply L and N to the Shelly through other wiring like in the diagram, then you can have physical switch control and smart control. But you will hit the problem of the state in the smart control getting out of sync when you use physical switch to turn off.

For my own setup, I want HA to maintain state in sync with the physical switch state so I adapted this idea for my purpose.
 

waterfoe

Junior Member
Joined
Jan 21, 2002
Messages
71
Reaction score
0
At the back of any switch, only has the following cable:

1. Live - Brown
2. Neutral - Blue (if u have smart switch)
3. Lighting loads - Brown (Can have more than 1 depending on the lighting circuits you have)

Just need to connect the particular lighting loads to the live wire sockets and it will be perpetually on

It depends on whether you have ceiling pendant of this configuration:
68747470733a2f2f692e696d6775722e636f6d2f3678614c4744472e706e67
taken from this link.

If you are able to supply L and N to the Shelly through other wiring like in the diagram, then you can have physical switch control and smart control. But you will hit the problem of the state in the smart control getting out of sync when you use physical switch to turn off.

For my own setup, I want HA to maintain state in sync with the physical switch state so I adapted this idea for my purpose.
 

pustefix

Senior Member
Joined
Feb 6, 2012
Messages
537
Reaction score
10
Is this a simpler diagram for shelly? I don't see the benefit of using shelly versus something like the Aqara wall switch with neutral. The Aqara switch works with HA reporting the correct state for both physical or smart control.
hookup.jpg
 

porker997

Junior Member
Joined
Aug 15, 2007
Messages
59
Reaction score
0
Morning gents,

Anyone here had experience with LIFX bulbs? I'm considering Philips Hue vs LIFX.

I see one advantage of LIFX is that it works directly without needing to purchase a Hue Hub.

Cheers,
porker
 

Vulpix

Moderator
Moderator
Joined
Jan 1, 2000
Messages
105,337
Reaction score
3,864
Morning gents,

Anyone here had experience with LIFX bulbs? I'm considering Philips Hue vs LIFX.

I see one advantage of LIFX is that it works directly without needing to purchase a Hue Hub.

Cheers,
porker
LIFX is generally considered brighter than HUE. Problem is they are constantly out of stuck for E27 mount which is what we are using here.

 
Last edited:

pajamasguy

Junior Member
Joined
Sep 28, 2007
Messages
83
Reaction score
0
LIFX is generally considered brighter than HUE. Problem is they are constantly out of stuck for E27 mount which is what we are using here.

It’s out of stock because you selected the US site. Try the Ozzie site and you will see the e27 bulbs. I got tricked too 😅

I am using LIFX bulbs. These were my very first smart things. They are expensive but the colors and brightness really is good. I just wish they cost less.
 

Vulpix

Moderator
Moderator
Joined
Jan 1, 2000
Messages
105,337
Reaction score
3,864
It’s out of stock because you selected the US site. Try the Ozzie site and you will see the e27 bulbs. I got tricked too 😅

I am using LIFX bulbs. These were my very first smart things. They are expensive but the colors and brightness really is good. I just wish they cost less.
Oh neat, I went to the UK Amazon and found it too. :s13:
 

pajamasguy

Junior Member
Joined
Sep 28, 2007
Messages
83
Reaction score
0
I really dunno what’s their deal. There’s a selection for e27 why not make it available at LIFX.com?
US dollars is the cheaper price to buy I think. So it’s not economical to pay in Aus or pounds
 

Vulpix

Moderator
Moderator
Joined
Jan 1, 2000
Messages
105,337
Reaction score
3,864
I really dunno what’s their deal. There’s a selection for e27 why not make it available at LIFX.com?
US dollars is the cheaper price to buy I think. So it’s not economical to pay in Aus or pounds
Pounds still ok lah. You take out the tax, it's about 32 pounds.
 

porker997

Junior Member
Joined
Aug 15, 2007
Messages
59
Reaction score
0
Thanks for the quick replies.

Been watching videos on comparing both products. very close i think.

Overall, leaning towards Philips given its slightly wider product range. Also I found there is actually 3rd party? philips switch adaptors. I don't have to dismantle my existing dumb switches. Just peel out the old switch and use the adaptor with the smart philips switch. Quite neat. Not sure of the fitting of the adaptors for SG market though. Anyone tried that?

Separately, for SG market, which kind of bulb I should be using?

Cheers,
P
 

Vulpix

Moderator
Moderator
Joined
Jan 1, 2000
Messages
105,337
Reaction score
3,864
Thanks for the quick replies.

Been watching videos on comparing both products. very close i think.

Overall, leaning towards Philips given its slightly wider product range. Also I found there is actually 3rd party? philips switch adaptors. I don't have to dismantle my existing dumb switches. Just peel out the old switch and use the adaptor with the smart philips switch. Quite neat. Not sure of the fitting of the adaptors for SG market though. Anyone tried that?

Separately, for SG market, which kind of bulb I should be using?

Cheers,
P

Are you going smart switch bulb or dumb switch smart bulb?
 
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top