StarHub MaxInfinity Fiber Optic - Experience

[GamerZ]

btw, for the earlier response..

set to DHCP on huawei then connect 855 via dhcp..

copy down the ip & etc,

then set back to disable dhcp on huawei and static connect 855 via the ip copied.

easiest for you

then hopefully you will know what went wrong

Thanks a lot =) Will try it the moment I get home from work =) Will post my updates here =D

 

[wwyjoe]

every router... have more/less d same setup.

sorry bro, i'm a noob to networking...what settings might that be? thanks

 

[MarineX]

sorry bro, i'm a noob to networking...what settings might that be? thanks

refer from post #1 ?

just that the ip address and etc might be different and you will need to know a thing or 2 to set it up.

if not, read the manual and gain some enlightenment..

OR

try asking the elites here

if still no good..

why did you spend $ on something that you have ZERO idea on what to do???

haha. jk


buy me 1 so i can teach u step by step *evil*

 

[GamerZ]

1. It seems my firmware got upgraded to v22
2. I tried DHCP on for rg side, no effect at all. I also notice 1 thing, when connected directly, my up speed is 30mbps, going through my router, it became 1mbps. =(
3. Tried changing cable, no difference as well

 

[MarineX]

1. It seems my firmware got upgraded to v22
2. I tried DHCP on for rg side, no effect at all. I also notice 1 thing, when connected directly, my up speed is 30mbps, going through my router, it became 1mbps. =(
3. Tried changing cable, no difference as well

1. grats
2. no effect at all? what do you mean?

 

[GamerZ]

1. grats
2. no effect at all? what do you mean?

Looks like my issue is solved! I just upgraded DIR-855 from v1.12 to 1.23! That resets my router to factory default and I re-do all the config again.

So I don't know whether it is a firmware issue or settings issue.

 

[GamerZ]

I have posted a tutorial on my blog http://lesterchan.net/blog/2011/08/02/bridging-huawei-hg256s-d-link-dir-855/ and of course gave credits to MarineX!

 

[MarineX]

I have posted a tutorial on my blog http://lesterchan.net/blog/2011/08/02/bridging-huawei-hg256s-d-link-dir-855/ and of course gave credits to MarineX!

i tell you the reason:

the first time you set your DNS wrongly.

 

[GamerZ]

i tell you the reason:

the first time you set your DNS wrongly.

Really? DNS on Router should point to 192.168.2.1 right? which is the IP of the RG?

 

[MarineX]

Really? DNS on Router should point to 192.168.2.1 right? which is the IP of the RG?

try setting it back to the old 1 ?

 

[GamerZ]

try setting it back to the old 1 ?

OH, Okie took a look at my prev post and refresh my memory "Dlink DIR-855 DNS (Pri/Sec): 192.168.2.2" Hehe

 

[MarineX]

OH, Okie took a look at my prev post and refresh my memory "Dlink DIR-855 DNS (Pri/Sec): 192.168.2.2" Hehe

that is why i told you to set it to auto, read what is it and realize where your mistake is.

but still.. is good to re-configure from scratch.

 

[GamerZ]

that is why i told you to set it to auto, read what is it and realize where your mistake is.

but still.. is good to re-configure from scratch.

Yea, my bad, reconfigure everything from scratch is a good thing =p

 

[newsense]

It seems that smallnetbuilder website is down, anyone can confirm? Been trying since yesterday to access but the page can't load.

 

[oric1]

It seems that smallnetbuilder website is down, anyone can confirm? Been trying since yesterday to access but the page can't load.

Yah, I get blank screen... nothing appear.... but when I connect via VPN, everything is normal... btw, I'm using MOL.

 

[MarineX]

It seems that smallnetbuilder website is down, anyone can confirm? Been trying since yesterday to access but the page can't load.

some parts yes, some parts no.

even i tried using my singnet bb same result

 

[MarkChenTW]

maybe they ban singapore ip who knows.

 

[steveyhere]

Dear all, just got my Starhub ONT / Huawei HG installed. Will be using my current Asus RT N56U for wifi with setup as below:

(ONT) LAN Port 1 -> (HG256s) WAN Port
(HG256s) LAN Port 1 -> (Asus-RT N56U) WAN Port

Anyone using the same setup as mine? Appreciate any advice what other settings I need to configure.

Many thanks!

I was doing that previously but it create 2 wireless network isn't it? Is there a way to have just one network by setting up the 2nd router to transmit the same as the 1st?

Sorry if I ask stupid question. My knowledge of router is shallow.

 

[liangtam]

I was doing that previously but it create 2 wireless network isn't it? Is there a way to have just one network by setting up the 2nd router to transmit the same as the 1st?

Sorry if I ask stupid question. My knowledge of router is shallow.

Run 2 wireless good what. One for older b/g clients. The other for purely N device, so wont slow down capability of faster sets.

 

[MarkChenTW]

brother liangtam you using SH??? if RG not HG256s can pm me? i need some info thanks in advance