[Official] Home Automation Thread

AsusEpoxy

Master Member
Joined
Aug 3, 2003
Messages
3,438
Reaction score
23
anyone come across padlock that can be unlock from app without bluetooth?
Looking for something to lock my gate such that i can unlock when courier call so that they can leave my bigger parcel inbetween the wooden door and gate.

without bluetooth means you are hoping to unlock via either Z-wave or Zigbee.. havent found such a lock in padlock form...
 
Joined
May 11, 2017
Messages
62,282
Reaction score
11,756
so that means even if the lock supports z-wave, its moot? doesn't make sense

Yeah trigger point is use the numerical key
my thumbprint didn't send signal
also, this company ( YALE ) don't encourage smart home to be used in their digital lock. they scared you buy from KR and give a lot of disclaimer. got problem will daiji back to your smart home installer.

I think Ok to buy entry d-locks but not higher end ones esp for smart home.
 

MaoZeDuo

Supremacy Member
Joined
Aug 16, 2012
Messages
9,806
Reaction score
66
Some models have otp not sure if this function will work for you

anyone come across padlock that can be unlock from app without bluetooth?
Looking for something to lock my gate such that i can unlock when courier call so that they can leave my bigger parcel inbetween the wooden door and gate.
 

argento

Junior Member
Joined
Jul 3, 2003
Messages
16
Reaction score
0
Yes two gateways but majority of them are on the main gateway. I think about 47 zigbee devices on my main gateway and less than 10 on the other. The rest are wifi devices
What gateway are you using ? I was under the impression that the xiaomi gateway could handle at max 30 devices and even then it starts to get laggy.
 

pajamasguy

Junior Member
Joined
Sep 28, 2007
Messages
83
Reaction score
0
What gateway are you using ? I was under the impression that the xiaomi gateway could handle at max 30 devices and even then it starts to get laggy.
Mijia gateway and AC Companion
Yes supposed to be 30-32 devices but I was able to keep adding to it. It doesn’t care too much about the smaller sensors but more picky on the number of wall switches
 

argento

Junior Member
Joined
Jul 3, 2003
Messages
16
Reaction score
0
Mijia gateway and AC Companion
Yes supposed to be 30-32 devices but I was able to keep adding to it. It doesn’t care too much about the smaller sensors but more picky on the number of wall switches
Hmm, good to know. Will have to test that out.
 

viix

Master Member
Joined
Nov 17, 2001
Messages
3,236
Reaction score
2
don't buy yale locks

the absalloy doesn't support smart devices. taiji all the way. if the digital lock has finger print as entrance pw, it doesn't trigger the zwave device. they are still in la la land

Apparently only some lock functions are reported based on this article
 
Last edited:

IloveEmma

Senior Member
Joined
Nov 13, 2013
Messages
1,186
Reaction score
0
Wow, that is a lot of devices, are you using more than 1 gateway?



For RM pro, it should be the IHC app, basically use the app specified by the manufacturer to connect the device to your WiFi network.

Hi, i have set up my home assistant and also trying to configure. Can you share you configuration codes?
 

bluez

Junior Member
Joined
Nov 22, 2004
Messages
40
Reaction score
0
Hi all, I have a question that might sound silly..

Can I on / off a yeelight / Phillips hue lightstrip for my cove light with a smart light switch (either xiaomi or broadlink tc2)?

I need a simple switch together with the rest of the lights for my parents to on/off
 

earthtk

Senior Member
Joined
Feb 16, 2008
Messages
1,704
Reaction score
4
Hi all, I have a question that might sound silly..

Can I on / off a yeelight / Phillips hue lightstrip for my cove light with a smart light switch (either xiaomi or broadlink tc2)?

I need a simple switch together with the rest of the lights for my parents to on/off
Can is can but I think individual item has smart function. So if your switch is off you won't be able to on the lights.

Sent from Samsung SM-G965F using GAGT
 

pustefix

Senior Member
Joined
Feb 6, 2012
Messages
537
Reaction score
10
Can I on / off a yeelight / Phillips hue lightstrip for my cove light with a smart light switch (either xiaomi or broadlink tc2)?

I am not 100% sure that this will work but it is easier to use light strip and wall switch from the same ecosystem e.g. Yeelight strip with Aqara wall switch. On my Android MiHome app on China server, I can add Yeelight strip. So I am assuming that you can add both Aqara wall switch and Yeelight strip using MiHome app and set rules to turn on Yeelight when wall switch is ON and vice versa.
 
Last edited:

bluez

Junior Member
Joined
Nov 22, 2004
Messages
40
Reaction score
0
Oh thanks! Forget that these are smart lights that I can set rules for.


The more i read the more confused I am.
I understand that xiaomi is now compatible with google assistant/Alexa. If i get the sensors, can i just set scenes on google home or must I still have a xiaomi gateway to control all my xiaomi stuff? Or alternatively can i just do it through the xiaomi app?

Correct me if I'm wrong, xiaomi gateway connects to devices wirelessly and does not need to be in the same room. So 1 is enough for the house unless I need to connect more devices than what they can support?

If my router is down (no connections at all, not only internet), all this smart stuff won't work right? Or cos xiaomi uses zigabee, it will all still work?

I am not 100% sure that this will work but it is easier to use light strip and wall switch from the same ecosystem e.g. Yeelight strip with Aqara wall switch. On my Android MiHome app on China server, I can add Yeelight strip. So I am assuming that you can add both Aqara wall switch and Yeelight strip using MiHome app and set rules to turn on Yeelight when wall switch is ON and vice versa.
 

pustefix

Senior Member
Joined
Feb 6, 2012
Messages
537
Reaction score
10
I understand that xiaomi is now compatible with google assistant/Alexa. If i get the sensors, can i just set scenes on google home or must I still have a xiaomi gateway to control all my xiaomi stuff? Or alternatively can i just do it through the xiaomi app?

Correct me if I'm wrong, xiaomi gateway connects to devices wirelessly and does not need to be in the same room. So 1 is enough for the house unless I need to connect more devices than what they can support?

If my router is down (no connections at all, not only internet), all this smart stuff won't work right? Or cos xiaomi uses zigabee, it will all still work?

Xiaomi sensors are using Zigbee, so you will need a hub to communicate with it.
Sensor--[Zigbee]-->Hub--[WiFi]-->Router--[WiFi]-->Yeelight
For Xiaomi gateway if it is within Zigbee wireless range, it should connect to the various devices, max is 30 Zigbee devices per gateway.

I've just tested this, if router is turned off, automation rules will still work if devices involved are all Zigbee, e.g. motion sensor turn on Aqara switch. If only internet is down but LAN is working then all automation should still work e.g. motion sensor turn on Yeelight/Xiaomi fan.
 

bluez

Junior Member
Joined
Nov 22, 2004
Messages
40
Reaction score
0
Xiaomi sensors are using Zigbee, so you will need a hub to communicate with it.
Sensor--[Zigbee]-->Hub--[WiFi]-->Router--[WiFi]-->Yeelight
For Xiaomi gateway if it is within Zigbee wireless range, it should connect to the various devices, max is 30 Zigbee devices per gateway.

I've just tested this, if router is turned off, automation rules will still work if devices involved are all Zigbee, e.g. motion sensor turn on Aqara switch. If only internet is down but LAN is working then all automation should still work e.g. motion sensor turn on Yeelight/Xiaomi fan.

Thanks all for the advice! Time to invest and try it out!
 

maverick_24

Junior Member
Joined
Sep 18, 2018
Messages
2
Reaction score
0
Recommendations on Smart Switches with Feedback

Hi, is there any recommendations on smart switches with status feedback? My wife always cannot remember whether she switches off the storage heater after leaving house in the morning. Since the switch is to be used on the storage heater, it will be good that it can support a higher Amps current.

Thanks in advance.
 
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top