[Temperature] CPU & GPU idle & load running temp - Please share here!!

[shadow84]

How to mak hdd/ssd temp appear in hwmonitor?

 

[i1magic]

temp config for now.... load temps based on hyperpi and heaven benchmark 4.0



running at room temp, hardly any ventilation for surroundings.

Wah lau ... yours is water cooled ah?

 

[tamjinhang]

Wah lau ... yours is water cooled ah?

Yup. Processor cooled by undervolting to 0.85V and using a custom water loop along with one 360mm rad.

GTX 680 cooled by smacking on an AIO WC kit.

*I forgot to mention the fans in the PC are running at approx 70 to 80% of max speed. Usually I don't go switch to max speed due to alight increase in noise, unless I do something like gaming.

 

[fokgola]

What is your room temperature? Air con or not air con?

No air con.

 

[MevolutionX]

Stock heatsink, one exhaust fan. Ambient temp 25C
Gonna go for close-loop water cooling soon...

Idle, doing forum browsing... HAHA

 

[royfrosty]

Front 2 chassis fans and Exhaust are running on max speed connected to PSU.

Using Xigmatek Gaia with 1 Sickle flow red led running at 1.6k rpm connected to mobo stock speed.

Non ac room. Current room temp 29.6 degrees from my wall thermometer.

Run BF3 for 1 hour plus

 

[sunset]

Considered ok? Non-aircon.

 

[i1magic]

Stock heatsink, one exhaust fan. Ambient temp 25C
Gonna go for close-loop water cooling soon...

Idle, doing forum browsing... HAHA

You on stock head sink for your CPU and your temperature looks ok leh.

25degC is aircon or natural?

 

[i1magic]

Yup. Processor cooled by undervolting to 0.85V and using a custom water loop along with one 360mm rad.

GTX 680 cooled by smacking on an AIO WC kit.

*I forgot to mention the fans in the PC are running at approx 70 to 80% of max speed. Usually I don't go switch to max speed due to alight increase in noise, unless I do something like gaming.

How do you control the speed of the fans?

 

[i1magic]

Considered ok? Non-aircon.

Wah ... no aircon and assuming room temp about 27-28. Your CPU temps are really good.

Are you on water cooling?

 

[sunset]

Wah ... no aircon and assuming room temp about 27-28. Your CPU temps are really good.

Are you on water cooling?

Yup.. On H100i.. The graphics card like kind of high i think..

 

[tamjinhang]

How do you control the speed of the fans?

For casing, I'm using NZXT Phantom 630... It includes a low-mid-high switch on casing which connects to fan hub PCB behind motherboard tray (also included). I have 11 fans connected to that (8 GT AP-15 [1850RPM], 3 GT PWM [2150RPM]) and 1 NZXT 200mm front fan connected to mobo.

 

[shadow84]

For casing, I'm using NZXT Phantom 630... It includes a low-mid-high switch on casing which connects to fan hub PCB behind motherboard tray (also included). I have 11 fans connected to that (8 GT AP-15 [1850RPM], 3 GT PWM [2150RPM]) and 1 NZXT 200mm front fan connected to mobo.

Is the Ap-40 (2150rpm) good?

And how you connect your 680 with the thermaltake water 2.0 pro?

 

[tamjinhang]

really gd airflow.

and i have to use customised bracket to attach the thermaltake AIO. alternatively, use cable ties =p

 

[i1magic]

For casing, I'm using NZXT Phantom 630... It includes a low-mid-high switch on casing which connects to fan hub PCB behind motherboard tray (also included). I have 11 fans connected to that (8 GT AP-15 [1850RPM], 3 GT PWM [2150RPM]) and 1 NZXT 200mm front fan connected to mobo.

Wow ... is it possible for you to post picture here?

 

[funnymedic]

Are the temps normal? I'm in a non-air con environment.

 

[shadow84]

How to show hdd/ssd temp as well?

 

[royfrosty]

How to show hdd/ssd temp as well?

By right it should show by default.

 

[i1magic]

This is mine.

Room Temp : 30 degC

 

[shadow84]

Seems like it depends on the mobo... looking through the threa, some ppl dun have, some ppl have.. for asrock, it is missing the +3.3v, +5v, +12v..